Lightware UMX4x4-Pro User Manual page 113

Step 2. Start the application
To run the Bootloader software, double click on the icon of the software on the desktop or
select proper shortcut from Start Menu  Programs  Lightware folder.
Step 3. Find devices
Make sure that no active connection is made to the device (Lightware Matrix Controller
software or web browser connected to the built-in website). Then click on the FIND button
to query the Ethernet for Lightware devices.
Info: COM ports do not list any information about the connected devices, users must know which
COM port is connected to the Lightware device.
Section 8. Firmware upgrade
Figure 8-1. Bootloader software startup
UMX4x4-Pro
User's Manual
Page 113 / 129