Configuring Remote Ldp Session Parameters - HP 10500 SERIES Configuration Manual

Step
3. Set the link Hello timer.
4. Set the link Keepalive timer.
Configure the LDP transport
5.
address.

Configuring remote LDP session parameters

LDP sessions established between remote LDP peers are remote LDP sessions. Remote LDP sessions are
mainly used in Martini MPLS L2VPN and Martini VPLS. For more information about remote session
applications, see
To establish a remote LDP session, perform the following operations:
Determine the LDP transport addresses of the two peers and make sure the LDP transport addresses
•
are reachable to each other. Do this to establish the TCP connection.
• If many LDP sessions exist between the two LSRs or the CPU is occupied often, adjust timers to ensure
the stability of the LDP sessions.
To configure remote LDP session parameters:
Step
1. Enter system view.
2. Create a remote peer entity
and enter MPLS LDP remote
peer view.
3. Configure the remote peer IP
address.
4. Configure LDP to advertise
prefix-based labels through a
remote session.
5. Set the targeted Hello timer.
Command
mpls ldp timer hello-hold value
mpls ldp timer keepalive-hold
value
mpls ldp transport-address
{ ip-address | interface }
"Configuring MPLS L2VPN" and
Command
system-view
mpls ldp remote-peer
remote-peer-name
remote-ip ip-address
prefix-label advertise
mpls ldp timer hello-hold value
"Configuring VPLS."
64
Remarks
Optional.
15 seconds by default.
Optional.
45 seconds by default.
Optional.
The default takes the value of the
MPLS LSR ID.
The specified IP address must be
the IP address of an interface on
the switch for setting up LDP
sessions.
Remarks
N/A
N/A
The remote peer IP address must be
different from all existing remote
peer IP addresses.
Optional.
By default, LDP does not advertise
prefix-based labels through a
remote session, and remote
sessions are used only to transfer
messages for L2VPNs. For more
information about remote session
applications, see the Martini MPLS
L2VPN configuration in
"Configuring MPLS L2VPN."
Optional.
The default value is 45 seconds.