HP 10500 SERIES Configuration Manual page 287

After completing the configuration, issue the display bgp peer command or the display bgp vpnv4
all peer command on the PEs. The output shows that BGP peer relationship has been established
between the PEs, and has reached Established state.
[PE1] display bgp peer
BGP local router ID : 1.1.1.9
Local AS number : 100
Total number of peers : 1
Peer AS
3.3.3.9 100
Verify the configuration:
6.
# Issue the display ip routing-table vpn-instance command on the PEs. The output shows the routes
to the CEs. Take PE 1 as an example:
[PE1] display ip routing-table vpn-instance vpn1
Routing Tables: vpn1
Destinations : 5
Destination/Mask
10.1.1.0/24
10.1.1.2/32
10.3.1.0/24
127.0.0.0/8
127.0.0.1/32
[PE1] display ip routing-table vpn-instance vpn2
Routing Tables: vpn2
Destinations : 5
Destination/Mask
10.2.1.0/24
10.2.1.2/32
10.4.1.0/24
127.0.0.0/8
127.0.0.1/32
CEs of the same VPN can ping each other. Those of different VPNs cannot ping each other. For
example, CE 1 can ping CE 3 (10.3.1.1) but cannot ping CE 4 (10.4.1.1):
[CE1] ping 10.3.1.1
PING 10.3.1.1: 56
Reply from 10.3.1.1: bytes=56 Sequence=1 ttl=253 time=72 ms
Reply from 10.3.1.1: bytes=56 Sequence=2 ttl=253 time=34 ms
Reply from 10.3.1.1: bytes=56 Sequence=3 ttl=253 time=50 ms
Reply from 10.3.1.1: bytes=56 Sequence=4 ttl=253 time=50 ms
Reply from 10.3.1.1: bytes=56 Sequence=5 ttl=253 time=34 ms
--- 10.3.1.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 34/48/72 ms
[CE1] ping 10.4.1.1
PING 10.4.1.1: 56
Request time out
Request time out
MsgRcvd MsgSent OutQ
2 6
Routes : 5
Proto Pre Cost
Direct 0 0
Direct 0 0
BGP 255 0
Direct 0 0
Direct 0 0
Routes : 5
Proto Pre Cost
Direct 0 0
Direct 0 0
BGP 255 0
Direct 0 0
Direct 0 0
data bytes, press CTRL_C to break
data bytes, press CTRL_C to break
279
Peers in established state : 1
PrefRcv Up/Down
0 0 00:00:12 Established
NextHop
10.1.1.2
127.0.0.1
3.3.3.9
127.0.0.1
127.0.0.1
NextHop
10.2.1.2
127.0.0.1
3.3.3.9
127.0.0.1
127.0.0.1
State
Interface
Vlan11
InLoop0
NULL0
InLoop0
InLoop0
Interface
Vlan12
InLoop0
NULL0
InLoop0
InLoop0