Configuring Inter-As Ipv6 Vpn Option A - HP 10500 SERIES Configuration Manual

bytes=56 Sequence=1 hop limit=64
Reply from 2001:3::1
bytes=56 Sequence=2 hop limit=64
Reply from 2001:3::1
bytes=56 Sequence=3 hop limit=64
Reply from 2001:3::1
bytes=56 Sequence=4 hop limit=64
Reply from 2001:3::1
bytes=56 Sequence=5 hop limit=64
--- 2001:3::1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/1/1 ms
[CE1] ping ipv6 2001:4::1
PING 2001:4::1 : 56
Request time out
Request time out
Request time out
Request time out
Request time out
--- 2001:4::1 ping statistics ---
5 packet(s) transmitted
0 packet(s) received
100.00% packet loss
round-trip min/avg/max = 0/0/0 ms

Configuring inter-AS IPv6 VPN option A

Network requirements
CE 1 and CE 2 belong to the same VPN. CE 1 accesses the network through PE 1 in AS 100 and CE 2
accesses the network through PE 2 in AS 200.
An inter-AS IPv6 MPLS L3VPN is implemented using option A, where the VRF-to-VRF method is used to
manage VPN routes.
The MPLS backbone in each AS runs OSPF.
time = 1 ms
time = 1 ms
time = 1 ms
time = 1 ms
time = 1 ms
data bytes, press CTRL_C to break
368