Configuring Routing Between Pes; Configuring Routing Features For Bgp Vpnv4 Subaddress Family - HP 10500 SERIES Configuration Manual

Hide thumbs Also See for 10500 SERIES:
Table of Contents

Advertisement

NOTE:
Exchange of BGP routes of a VPN instance is the same as that of ordinary BGP routes.
The BGP configuration task in BGP VPN instance view is the same as that in BGP view. For more
information, see

Configuring routing between PEs

Step
1.
Enter system view.
2.
Enter BGP view.
3.
Configure the remote PE as
the peer.
4.
Specify the source interface
for route updates.
5.
Enter BGP-VPNv4 subaddress
family view.
6.
Enable the exchange of
BGP-VPNv4 routing
information with the specified
peer.

Configuring routing features for BGP VPNv4 subaddress family

With BGP VPNv4 subaddress family, there are a variety of routing features that are the same as those for
BGP IPv4 unicast routing. You can select any of the features as required.
Configuring common routing features for all types of subaddress families
For VPN applications, BGP address families include BGP VPN-IPv4 address family, BGP-L2VPN address
family, and VPLS address family. Every command in the following table has the same function on BGP
routes for each type of the address families and only takes effect for the BGP routes in the address family
view where the command is executed.
To configure common routing features for all types of subaddress families:
Step
1.
Enter system view.
2.
Enter BGP view.
3.
Configure the remote PE as
the peer.
4.
Specify the interface for TCP
connection.
Layer 3—IP Routing Configuration Guide
Command
system-view
bgp as-number
peer { group-name | ip-address }
as-number as-number
peer { group-name | ip-address }
connect-interface interface-type
interface-number
ipv4-family vpnv4
peer { group-name | ip-address }
enable
Command
system-view
bgp as-number
peer ip-address as-number
as-number
peer ip-address connect-interface
interface-type interface-number
.
259
Remarks
N/A
N/A
N/A
By default, BGP uses the source
interface of the optimal route
update packet.
N/A
By default, BGP peers exchange
IPv4 routing information only.
Remarks
N/A
N/A
N/A
N/A

Advertisement

Table of Contents
loading

Table of Contents