Resetting L2Vpn Bgp Sessions; Displaying And Maintaining Mpls L2Vpn - HP 10500 SERIES Configuration Manual

Step
3. Create a CE, specify the
CE name, CE ID, and the
CE ID initial offset, and
enter MPLS L2VPN CE
view.
4. Create
connection.

Resetting L2VPN BGP sessions

To apply new settings that affect route selection, reset L2VPN BGP sessions in user view.
Task
Reset L2VPN BGP sessions.

Displaying and maintaining MPLS L2VPN

Task
Display information about CCC
connections.
Display information about
specified L2VPN VC interfaces.
Display information about static
VCs.
Command
ce ce-name [ id ce-id [ range ce-range ]
[ default-offset ce-offset ] ]
connection [ ce-offset id ] interface
a Kompella
interface-type interface-number
[ tunnel-policy tunnel-policy-name ]
Command
display ccc [ ccc-name ccc-name |
type { local | remote } ] [ | { begin
| exclude | include }
regular-expression ]
display l2vpn ccc-interface vc-type
{ all | bgp-vc | ccc | ldp-vc |
static-vc } [ up | down ] [ | { begin
| exclude | include }
regular-expression ]
display mpls static-l2vc [ interface
interface-type interface-number
[ service-instance instance-id ] ] [ |
{ begin | exclude | include }
regular-expression ]
Command
reset bgp l2vpn { as-number | ip-address | all |
external | internal }
207
Remarks
N/A
The ce-offset ce-id option
determines whether the connection
is a local connection or a remote
connection. If the specified CE is
connected to the same PE as the
local CE, the connection is a local
connection. Otherwise, the
connection is a remote connection.
The interface interface-type
interface-number option specifies a
PE-CE interface of the PE. By
specifying the interface, you bind
the AC link on the interface to the
Kompella connection.
Remarks
Available in any view.
Available in any view.
Available in any view.