HP 10500 SERIES Configuration Manual page 51

Step
3. Redistribute the VPN
routes.
4. Configure the default cost
value for the redistributed
routes.
5. Return to system view.
6. Enter interface view.
7. Enable the RIPng process
on the interface.
Configuring OSPFv3 between IPv6 MCE and PE
Step
1. Enter system view.
2. Create an OSPFv3
process for an IPv6 VPN
instance and enter
OSPFv3 view.
3. Set the router ID.
4. Redistribute the VPN
routes.
5. Configure a filtering policy
to filter redistributed
routes.
6. Return to system view.
7. Enter interface view.
8. Enable the OSPFv3
process on the interface.
Configuring IPv6 IS-IS between IPv6 MCE and PE
Step
1. Enter system view.
2. Create an IS-IS process
for an IPv6 VPN
instance and enter IS-IS
view.
3. Configure a network
entity title.
Command
import-route protocol [ process-id ]
[ allow-ibgp ] [ cost cost | route-policy
route-policy-name ] *
default cost value
quit
interface interface-type interface-number
ripng process-id enable
Command
system-view
ospfv3 [ process-id ] vpn-instance
vpn-instance-name
router-id router-id
import-route protocol [ process-id |
allow-ibgp ] [ cost value | route-policy
route-policy-name | type type ] *
filter-policy { acl6-number | ipv6-prefix
ipv6-prefix-name } export [ bgp4+ |
direct | isisv6 process-id | ospfv3
process-id | ripng process-id | static ]
quit
interface interface-type
interface-number
ospfv3 process-id area area-id
[ instance instance-id ]
Command
system-view
isis [ process-id ] vpn-instance
vpn-instance-name
network-entity net
Remarks
By default, no route of any
other routing protocol is
redistributed into RIPng.
Optional.
0 by default.
N/A
N/A
Disabled by default.
Remarks
N/A
N/A
N/A
By default, no route of any other
routing protocol is redistributed
into OSPFv3.
Optional.
By default, redistributed routes
are not filtered.
N/A
N/A
Disabled by default.
Remarks
N/A
N/A
Not configured by default.