Mce Configuration Examples; Using Ospf To Advertise Vpn Routes To The Pe - HP 10500 SERIES Configuration Manual

Task
Display the BGP VPNv4 routing
information of a specific VPN
instance.
Clear the route flap dampening
information of a VPN instance.
Clear route flap history information
about a BGP peer of a VPN
instance.
For commands to display information about a routing table, see Layer 3—IP Routing Command
Reference.

MCE configuration examples

This section describes examples for configuring MCE.

Using OSPF to advertise VPN routes to the PE

Network requirements
As shown in
through VLAN-interface 20. RIP runs in VPN 2.
Configure the MCE device to separate routes from different VPNs and advertise the VPN routes to PE 1
through OSPF.
Figure 6, the MCE device is connected to VPN 1 through VLAN-interface 10 and to VPN 2
Command
display bgp vpnv4 vpn-instance
vpn-instance-name routing-table
[ network-address [ { mask | mask-length }
[ longer-prefixes ] ] | as-path-acl
as-path-acl-number | cidr | community
[ aa:nn ]&<1-13> [ no-advertise |
no-export | no-export-subconfed ] *
[ whole-match ] | community-list
{ basic-community-list-number
[ whole-match ] |
adv-community-list-number }&<1-16> |
dampened | dampening parameter |
different-origin-as | flap-info
[ network-address [ { mask | mask-length }
[ longer-match ] ] | as-path-acl
as-path-acl-number ] | peer ip-address
{ advertised-routes | received-routes } |
statistic ] [ | { begin | exclude | include }
regular-expression | [ flap-info ]
regular-expression as-regular-expression ]
reset bgp vpn-instance vpn-instance-name
dampening [ network-address [ mask |
mask-length ]
reset bgp vpn-instance vpn-instance-name
ip-address flap-info
reset bgp vpn-instance vpn-instance-name
flap-info [ ip-address [ mask |
mask-length ] | as-path-acl
as-path-acl-number | regexp
as-path-regexp ]
21
Remarks
Available in any view.
Available in user view.
Available in user view.