ADLINK Technology CoreModule 920 Reference Manual page 50

Chapter 4
COM (SOL) (Pci Bus0, Dev22, Func3)

• Console Redirection [Disabled; Enabled]
• Console Redirection Settings
- Terminal Type [VT100; VT100+; VT-UTF8; ANSI]
- Bits per second [9600; 19200; 38400; 57600; 115200]
- Data Bits [7; 8]
- Parity [None; Even; Odd; Mark; Space]
- Stop Bits [1; 2]
- Flow Control [None; Hardware RTS/CTS]
- VT-UTF8 Combo Key Support [Disabled; Enabled]
- Recorder Mode [Disabled; Enabled]
- Resolution 100x31 [Disabled; Enabled]
- Legacy OS Redirection [80x24; 80x25]
- Putty KeyPad [VT100; LINUX; XTERMR6; SCO; ESCN; VT400]
NOTE
The serial port console is not hardware protected. Diagnostic software that
probes hardware addresses may cause a loss or failure of the serial console
functions.
•
Intel ICC (Integrated Clock Control options)
Use Watchdog timer for ICC [Disabled; Enabled]

Turn off unused PCI/PCIe clocks [Disabled; Enabled]

Lock ICC registers [Static only; All registers]

Clock Manipulation

ICC Overclocking Lib

DIV-1S

• DIV-1S
• GFX
• Maximum supported frequency
• Minimum supported frequency
• Current frequency
• Current SSC mode
• Current SSC %
44
X.X.X.XX
XXX.XX MHz
XXX.XX MHz
XXX.XX MHz
Down
X.XX%
Reference Manual
BIOS Setup
CoreModule 920