Internal Data - YOKOGAWA GX20 User Manual

1.29 Initializing and Calibrating the System (Initialization, reconfiguration, touch screen calibration), Setting the Measurement Mode
Procedure
1-250
Other
Set this to On to initialize settings other than the security settings or control settings.
Communication(IP address)
Set this to On to initialize the IP address, DHCP, and DNS settings.
Communication (Server settings)
Set this to On when you want to initialize the server list settings, server encryption settings,
and channel conversion setting of DARWIN compatible communication.
Calibration correction settings
Set this to On to initialize calibration correction settings and calibration reminder settings (/
AH option).
Instruments tags, etc.
Set this to On to initialize instrument tag settings.
Setup Item

Internal Data

Internal data
Set this to On to initialize all data in the internal memory.
Initializing All Settings
1
Press MENU.
The menu screen appears.
2
Tap the Browse tab and then Initialize Calibration.
The menu screen appears.
3
Tap Initialize > Settings/Internal data > Initialize all > On.
4
Tap Execute.
A confirmation screen is displayed.
5
Tap OK.
The settings are initialized.
Operation complete
Note
• Before initializing, back up necessary setup parameters and other data.
Refer to page 1-238 in section 1.26.1, "Saving the Setting Parameters"
• Initialization does not initialize the A/D calibration password.
If you forget the password, you will not be able to perform A/D calibration. Make sure you do not
forget the password.
• When execute initialization, the message "Restart is required to reflect this changes. Continue?"
may appear. Tap OK, and the GX/GP will automatically restart with the specified language.
Selectable Range or Options
Off, On
Default Value
Off
IM 04L51B01-01EN