Alarm Display - YOKOGAWA GX20 User Manual

3.1 Using the Web Application to Change the GX/GP Settings, Monitor Data, and Control the GX/GP (Web server function)
3-24

Alarm Display

Alarm information is displayed in the bottom area. Alarm levels (1, 2, 3, and 4) are displayed
in order from the top. The duration of each alarm is indicated with a bar using the same color
as the corresponding channel. Alarms of channels that correspond to the active Y-axis are
shown in front.
1
Number Description
1 An alarm level 1 alarm on channel 0001
2 An alarm level 2 alarm on channel 0001
3 An alarm level 3 alarm on channel 0002
4 An alarm level 4 alarm on channel 0003
Cursor
You can use cursors to read the values at the cursor. Click the cursor display icon, and click
a location on the waveform display area. A cursor appears, and the channel values at the
cursor position is displayed in pop-up windows. Drag the pointer to display two cursors. You
can read the values at the two positions.
Note
• The pop-up window for the waveform that corresponds to the active Y-axis is shown in front.
• When waveform display limit is enabled, "+Over," "–Over," and "BURNOUT" are displayed for
channel values when appropriate.
Waveform Line Thickness
You can change the waveform line thickness.
Trip Lines
Trip lines are displayed for the active Y-axis and the Y-axes displayed in the same column as
the active Y-axis.
2
4
3
Alarm level 1
Alarm level 2
Alarm level 3
Alarm level 4
(red) channel 0001
(blue) channel 0002
(green) channel 0003
Channel color
Channel name
TI001
13.07
Measured value
IM 04L51B01-01EN