Initializing Display Groups Or Recording Channels Separately - YOKOGAWA GX20 User Manual

1.29 Initializing and Calibrating the System (Initialization, reconfiguration, touch screen calibration), Setting the Measurement Mode
1.29.2

Initializing Display Groups or Recording Channels Separately

Path
Description
IM 04L51B01-01EN
Control setting details
Control settings
Program pattern settings
Control event action
* The following control settings are not initialized. They are initialized when Initialize all is
specified or when Others is set to On.
Item
PID channel settings of control display
Math channel formula
You can initialize display groups or recording channels separately.
GX/GP: M ENU key > Browse tab > Init/Calib > menu Initialize > Individual settings
Setup Item
Display group settings
Recording channel settings
Display group settings
Set this to On to initialize display group settings.
Recording channel settings
Set this to On to recording channel settings.
Item
Setup parameters
Operation parameters
Control display
Program Run/Reset message
Automatic switch to program operation display
Program RUN detail settings
DI/DO/Internal switch registration
Selectable Range or Options
Off, On
Off, On
Basic control settings (control
settings, contact registration,
relay related)
I/O settings
PV, RSP settings
OUT settings
Control alarms
Target setpoints
PID number/Reference point
PID settings
Control detail setting
Control group settings
Loop display settings
Screen display settings
Default Value
Off
Off
1-253
1
2
3
4
5
App
Index