Configuring Recording Channels - YOKOGAWA GX20 User Manual

1.12 Setting Recording Conditions (Recording mode, recording interval, saving interval)
1.12.2

Configuring Recording Channels

Path
Description
IM 04L51B01-01EN
GX/GP: MENU key > Browse tab > Setting > Setting menu Recording settings >
Recording channel settings
Web application: Config. tab > Recording settings > Recording channel settings
Hardware configurator: Recording settings > Recording channel settings
Setup Item
Display data, Trend waveform AI, DI, pulse input, DO, AO, PID, math,
Event data
Manual sample
Display data, Trend waveform
Set the channels for recording display data. Channels that you can specify are displayed.
Even when recording mode is set to Event, if trend rate switching is set to On, set separate
channels from the recording channels of event data.
Event data
Set the channels for recording event data. Channels that you can specify are displayed.
If you specify more than the number of recordable channels, the recording interval will
automatically change to a setting that is possible.
Manual sample
Set the channels for recording manual sampled data. Channels that you can specify are
displayed.
Number of Recording Channels
Model
GX10/GP10
GX20-1/GP20-1
GX20-2/GP20-2
Manual sampled data is recorded to internal memory. If the number of manual sampled data
entries exceeds 400, the data is overwritten from the oldest entry.
Selectable Range or Options
communication channels
AI, DI, pulse input, DO, AO, PID, math,
communication channels
AI, DI, pulse input, DO, AO, PID, math,
communication channels
Maximum Number of Channels
50
50
100
Time
Manual sampled data
Default Value
—
—
—
App
Index
1-133
1
2
3
4
5