1.18 Setting The Timers - YOKOGAWA GX20 User Manual

1.18 Setting the Timers

1.18.1 Setting the Timers
Path
Description
IM 04L51B01-01EN
Set the timers that are used in the event action function and the TLOG computation of the
math function (/MT option). There are two types of timers: absolute and relative. You can set
up to 12 timers for each type.
1 For release number 3 and later, up to 12 timers can be set. For release numbers earlier than 3,
up to 4 timers can be used.
GX/GP: MENU key > Browse tab > Setting > Setting menu Timer settings > Timer Timer
1 to 12
Web application: Config. tab > Timer settings > Timer
Hardware configurator: Timer settings > Timer
Type
Setup Item
Type
Type
Set the timer type.
Options Description
Relative timer Times out at specified intervals.
Absolute timer Expires at the times determined by the reference time and the interval.
1
Interval
Setup Item
2
Day
2
Hour
2
Minute
3
Interval
1 Appears when the type is not set to Off.
2 Appears when the type is set to Relative timer.
3 Appears when the type is set to Absolute timer.
Day, Hour, Minute
Set the interval for the relative timer.
Interval
Set the interval for the absolute timer.
Action on Math Start
Setup Item
Reset
1 Appears when the type is set to Relative timer.
Reset
Set this to On to reset the timer when starting computation. Set this to Off to not reset. The
timer does not expire (if the timer is specified as an event, the action will not be executed).
1
You cannot change timers during recording or computing.
Selectable Range or Options
Off/Relative/Absolute
Selectable Range or Options
0 to 31
0 to 23
0 to 59
1min, 2min, 3min, 4min, 5min, 6min, 10min,
12min, 15min, 20min, 30min, 1h, 2, h, 3h, 4h,
6h, 8h, 12h, 24h
1
Selectable Range or Options
Off, On
Default Value
Off
App
Index
Default Value
0
1
0
1h
Default Value
On
1-159
1
2
3
4
5