D4.4 Setting Publication Data From/To Isa100 Device - YOKOGAWA YFGW410 User Manual

D4-5
<D4. Engineering of ISA100 System for PROFINET Interface>
D4.4 Setting Publication Data from/to ISA100
Device
To send or receive I/O data from/to a field wireless device through YFGW410 PROFINET in-
terface, you need to add the device, then set the route and configure the publication of I/O data
from/to the devices by using FWMC Configurator. Refer to the User's Manual of YFGW410 (IM
01W02D01-01EN) for the detailed operation of FWMC Configurator.
This section describes the key points of the setting the publication of I/O data by using FWMC
Configurator.
To set publication, as shown in Figure D4-4, select [Sampling Data] in the menu tree of FWMC
Configurator, then click [Add] button.
FD0404.ai
Figure D4-4 Sampling Data Tab
When the [Add] button in Figure D4-4 is clicked, the window shown in Figure D4-5 appears.
In this window, load the CF File for the device you would like to add and select device tag for the
device, then set the publication data by selecting the [Read Parameters] and [Write Parameters]
tabs.
IM 01W02D01-21EN