Setting The Display - YOKOGAWA GX20 User Manual

1.8 Configuring Math Channels (/MT option)
1.8.5

Setting the Display

Path
Description
1-102
Hysteresis
Set this to establish an offset between the value used to activate and release alarms.
Logging
Set this On to display an alarm (notify you) when an alarm occurs. If set to Off, when an
alarm occurs, the GX/GP outputs signals to alarm output DO channels or internal switches
but does not display the alarm. Alarms are also not recorded in the alarm summary.
Output type
Set the alarm output destination type.
Output No.
Set the number of the DO channel or internal switch to output alarms to.
Alarm delay
Setup Item
Hour
Minute
Second
Hour, Minute, and Second
Set the alarm delay value. These values are valid when the delay high limit or delay low limit
is in use.
GX/GP: MENU key > Browse tab > Setting > Setting menu Math channel settings >
Display settings
Web application: Config. tab > Math channel settings > Channel range (display example:
A001-A020) > Display settings
Hardware configurator: Math channel settings > Channel range (display example: A001
to A020) > Display settings
Setup Item
First-CH
Last-CH
First-CH, Last-CH
Select the target channels.
Tag
Setup Item
Characters
No.
Characters
Set the tag.
Not all characters may be displayed due to space constraints.
No.
Set the tag number.
Selectable Range or Options
0 to 24
0 to 59
0 to 59
Selectable Range or Options
GX20/GP20: A001 to A100
GX10/GP10: A001 to A050
Same as the first channel
Selectable Range or Options
Character string (up to 32 characters,
Character string (up to 16 characters,
Default Value
0
0
10
Default Value
A001
A001
Default Value
—
A a # 1
)
—
A a # 1
)
IM 04L51B01-01EN