Saving Internal Memory Files To An Sd Memory Card Or Usb Flash Memory; Saving Display Data Or Event Data During Recording Through Touch Operation - YOKOGAWA GX20 User Manual

2.5 Saving Various Types of Data
2.5.5 Saving Internal Memory Files to an SD Memory Card or USB Flash
Memory
2.5.6 Saving Display Data or Event Data during Recording through Touch
Operation
Procedure
2-72
• Snapshot data files are in PNG format.
• For file names, see page 1-141 in section 1.14.1, "Setting the Save Directory, File
Header, and File Name".
Note
Note that if you take a snapshot, you will not be able to take another snapshot for approximately 10
seconds.
If you are taking a snapshot through a communication command or event action, the
snapshot data file is saved to the SD memory card.
See page 2-45 in section 2.3.3, "Displaying a List of Data Files in the Internal Memory and
Saving Data (Memory summary)".
The save destination is the SD memory card in the GX/GP.
You can carry out this procedure when display data or event data is being recorded in Free
mode. Unsaved measured data is saved to the SD memory card.
When the measurement mode is Dual interval, measurement groups are saved
simultaneously.
File File
Saved the previous time
1
Press MENU.
The menu screen appears.
2
Tap the Universal tab.
The menu screen appears.
3
Tap Save display or Save event.
The display data or event data is saved to the SD card.
Operation complete
Save operation
File
Saved this time
Time
IM 04L51B01-01EN