Configuring The Darwin Compatible Communication Function; Configuring The Gx/Gp Ip Address, Subnet Mask, And The Like (For Ethernet); Configuring The Gx/Gp's Basic Serial Communication Conditions (For Rs-232, Rs-422/485) (Version 2.02 And Later) - YOKOGAWA GX20 User Manual

1.31 Using the DARWIN Compatible Communication Function (Release number 2 and later)
1.31.3

Configuring the DARWIN Compatible Communication Function

Path
Description
Path
Description
1.31.4 Configuring the GX/GP IP Address, Subnet Mask, and the Like (for
Ethernet)
1.31.5 Configuring the GX/GP's Basic Serial Communication Conditions (for
RS-232, RS-422/485) (version 2.02 and later)
IM 04L51B01-01EN
When Ethernet (Release number 2 (version 2.02) and later)
GX/GP: MENU key > Browse tab > Setting > Setting menu Communication (Ethernet)
settings > Server settings > Server list
Web application: Config. tab > Communication (Ethernet) settings > Server settings
Server list
Hardware configurator: Communication (Ethernet) settings > Server settings Server list
DARWIN
Setup Item
On, Off
1
Channel conversion
1 Appears when the On/Off settings is set to On.
On/Off
Select On to use the DARWIN compatible communication function.
Channel Conversion
Set the DARWIN type to perform channel conversion.
When sirial communication (Release number 2 (version 2.02) and later)
GX/GP: MENU key > Browse tab > Setting > Setting menu Communication (Serial)
settings >Basic settings
Web application: Config. tab > Communication (Serial) settings > Communication
(Serial) basic settings
Hardware configurator: Communication (Serial) settings > Communication (Serial)
basic settings
DARWIN
Setup Item
1
Channel conversion
1 Appears when the receiver function settings is set to DARWIN.
Channel Conversion
Set the DARWIN type to perform channel conversion.
See page 1-180 in section 1.21.1, "Setting Basic Communication Conditions".
See page 1-198 in section 1.22.1, "Setting Basic Communication Conditions".
Selectable Range or Options
Off, On
Stand-alone type, extended type
Selectable Range or Options
Stand-alone type, extended type
1
2
3
4
Default Value
Off
Stand-alone type
5
App
Index
Default Value
Stand-alone type
1-271