Setting The Display - YOKOGAWA GX20 User Manual

1.4 Configuring Pulse Input Channels (Release number 3 and later)
1.4.3

Setting the Display

Path
Description
1-66
Logging
Set this On to display an alarm (notify you) when an alarm occurs. If set to Off, when an
alarm occurs, the GM outputs signals to alarm output DO channels or internal switches but
does not display the alarm. Alarms are also not recorded in the alarm summary.
Output type
Set the alarm output destination.
Output No.
Set the number of the DO channel or internal switch to output alarms to.
Alarm delay (for delay high/low limit alarms)
Setup Item
Hour
Minute
Second
Hour, Minute, and Second
Set the alarm delay. These values are valid when the delay high limit or delay low limit is in
use.
GX/GP: MENU key > Browse tab > Setting > Setting menu Pulse input channel settings
> Display settings
Web application: Config. tab > Pulse input channel settings > Channel range (display
example: 0701-0710) > Display settings
Hardware configurator: Pulse input channel settings > Channel range (display example:
0701-0710) > Display settings
Setup Item
First-CH
Last-CH
First-CH, Last-CH
Set the target channels. The channels that you can specify appear depending on the module
configuration.
Tag
Setup Item
Characters
No.
Characters
Set the tag.
Not all characters may be displayed due to space constraints.
No.
Set the tag number.
Selectable Range or Options
1 to 24
0 to 59
0 to 59
Selectable Range or Options
Pulse input channel
Pulse input channel
Selectable Range or Options
Character string (up to 32 characters,
Character string (up to 16 characters,
Default Value
0
0
10
Default Value
—
—
Default Value
) —
A a # 1
) —
A a # 1
IM 04L51B01-01EN