2.6 Using USB Peripheral Devices
2.6.3
Executing Communication Commands with a USB Bar code Reader
(Release number 2 and later)
2-76
You can execute communication commands from a USB bar code reader. You need to set
USB input device to Bar-code reader.
Input from the keyboard is also executed as a communication command.
For details on the commands that you can set and execute, see page 1-214 in section
1.23.11, "Setting USB Input Devices (/UH option)".
• Configuring the Bar Code Reader
Configure the bar code reader as follows:
USB Host Parameter
USB device type
USB keyboard type
Setting
HID keyboard simulation
Set the type in accordance with the GX/GP USB input device
setting.
• When the GX/GP setting is Bar-code reader
Bar code reader: US standard USB keyboard
IM 04L51B01-01EN