Chapter 1 Configuring The Gx/Gp And Viewing The Settings; Setup Guide (Read This First) - YOKOGAWA GX20 User Manual

Chapter 1 Configuring the GX/GP and Viewing the Settings
Setup Guide (Read this first)
GX/GP Setup Procedure
Configuration flowchart
1
Set the measurement mode.
Make the main unit recognize the modules.
2
(Reconfigure the GX/GP.)
Assign channel displays.
3
Assign automatically
Initialize
4
Set the date and time.
5 Configure settings.
IM 04L51B01-01EN
To use the GX/GP, follow the procedure below to configure it.
Assign manually
1
Set the measurement mode according to the
measurement conditions.
Operation: 1.29.3, "Setting the Measurement Mode"
Connected expandable I/O, GM sub unit, and installed
modules are identified, and the system is reconfigured.
If you change the system configuration, you need to
reconfigure.
Operation: 1.29.4, "Reconfiguring the GX/GP"
To assign channel displays (display group settings)
automatically, initialize.
To assign them manually, do it in "Configure settings."
Channel displays are assigned automatically along
with initialization.
Operation: 1.29.1, "Initializing the Settings and the
Internal Memory"
1 If you need to set the time zone or Daylight Saving
Time (DST) or both, do so before setting the date
and time.
Configure the GX/GP settings.
See the various settings from section 1.1.
1
2
3
4
5
App
Index
1-1