Setting The Display - YOKOGAWA GX20 User Manual

1.5 Configuring AO Channels (Analog input channels)
1.5.2

Setting the Display

Path
Description
1-74
Output Action When Settings Are Changed
Re-Trans
Description of change
• Reference channel settings, scan interval,
module operation mode, A/D integration time,
over-range detection, range-over judgment upper
and lower limits, chattering filter for pulse input
(DI module), and temperature unit
* Depending on the type of setting, it may take
some time for the measurement to start after
changing the setting.
• Output channel span
• Change to manual output
Manual
Description of change
• Change to retransmission output
• Preset value during preset output
GX/GP: MENU key > Browse tab > Setting > Setting menu AO channel settings >
Display settings
Web application: Config. tab > AO channel settings > Channel range (display example:
0701-0704) > Display settings
Hardware configurator: AO channel settings > Channel range (display example: 0701-
0704) > Display settings
Setup Item
First-CH
Last-CH
First-CH, Last-CH
The channel numbers that you can specify appear. Channel numbers vary depending on the
module.
Tag
Setup Item
Characters
No.
Characters
Set the tag.
Not all characters may be displayed due to space constraints.
No.
Set the tag number.
Precedence in Displaying Characters and Numbers (GX/GP main unit display only)
Tag numbers are displayed with higher precedence than tag characters.
When tag numbers are not assigned, tag characters are displayed.
If neither the tag numbers or tag characters are assigned, channel numbers are
displayed.
Action
After the settings are changed, the values before
the change are used until the next measurement
starts. Then, the new settings are applied.
It is applied to the next measurement after the
setting has been changed.
The value immediately before the setting was
changed is held until the next time the manual
value is changed.
Action
It is applied to the next measurement after the
setting has been changed.
It is applied at the next output update interval (100
ms).
Selectable Range or Options
AO channel
AO channel
Selectable Range or Options
Character string (up to 32 characters,
Character string (up to 16 characters,
Default Value
—
—
Default Value
—
A a # 1
)
—
A a # 1
)
IM 04L51B01-01EN