Registering And Showing The Standard Display; Loading And Displaying Display Data And Event Data From The External Storage Medium - YOKOGAWA GX20 User Manual

2.2 Configuration of Measured Data Display
2.2.9 Registering and Showing the Standard Display
Procedure
2.2.10 Loading and Displaying Display Data and Event Data from the External
Storage Medium
2-40
Registering the Standard Display
1
Show the display that you want to register as the standard display.
2
Press MENU.
The menu screen appears.
2
Tap the Universal tab and then Standard display.
The standard display setting screen appears.
3
Tap OK.
The standard display is registered.
Operation complete
Showing the Standard Display
1
Press MENU.
The menu screen appears.
2
Tap the Standard icon.
The standard display is shown.
Operation complete
Note
If you register the standard display on the historical trend screen, the trend display of the displayed
group will be registered as the standard display.
See page 2-81 in section 2.8.2, "Loading and Displaying the Measured Data (Display data
and event data) from the Storage Medium".
Shows the standard display
IM 04L51B01-01EN