Software • Upgrade information
Concerning point 1:
The MTCX Firmware FPGA and PX32 is automatically updated (default after 5 sec).
Warning!
The upgrade procedure must not be interrupted! Otherwise, the Power Panel may
no longer restart, and must be sent to B&R for repair. Try to repeat an interrupted
upgrade process WITHOUT restarting the Power Panel, e.g. by starting the batch file
UPDMTCX.BAT directly.
Concerning point 2:
Return to the shell (MS-DOS).
•
Select the desired action.
•
Remove the bootable media and reboot the device (only after a successful update!).
460
Power Panel 300/400 User's Manual V 2.10