Technical data • Power Panel 400 with Automation Runtime
4.15.4 Cutout installation
The cutout hole is to be made according to the following dimensions for cutout installation. The
device must be mounted using the retaining clips included in delivery.
4.15.5 Contents of delivery
The following components are included in the delivery of the Power Panel device:
Amount
1
6
1
252
245
238.5
Cutout dimensions 199 ±0.5 mm x 226.8 ±0.5 mm
11.7
0
Figure 169: Cutout installation - 4PP451.0571-65
Component
Power Panel PP451 5.7" QVGA, 1 aPCI, keys
Retaining clips included
Lithium battery 3 V / 950 mAh included
Table 94: Contents of delivery - 4PP451.0571-65
Outer contour (Power Panel)
Cutout
for
4PP351.0571-01
4PP351.0571-35
4PP451.0571-45
4PP451.0571-65
4PP451.0571-75
4PP451.0571-85
4PP451.0571-B5
Power Panel 300/400 User's Manual V 2.10