Date - B&R Industries Power Panel 300 User Manual

• 13:00:00 - Confirm with Enter
• 01:00:00 PM - Confirm with Enter
• 13: - Confirm with Enter
Information:
If using a German keyboard, press the "Shift+ö" key to enter ":".

1.3.3 Date

F1/ALT+H:Show Help
T. Time 12:30:25
D. Date 04/19/2007
B. Motherboard Device Configuration
M. Memory an Cache Optimization
C. System Clock/PLL Configuration
P. Power Management
I. Device Information
H. Miscellaneous Configuration
O. Boot Order
L. Load Defaults
S. Save Values Without Exit
Q. Exit Without Save
X. Save values and Exit
Date: _
Date as MM/DD/YYYY
Set the current time in the RTC
The current system date is displayed here. The date is buffered by a battery (CMOS battery)
after the Power Panel device has been switched off.
By selecting the item "Date" and the confirming by pressing Enter, or using the shortcut "B", you
can enter a new system date. The format MM:DD:YYYY must be entered as shown in the
following example:
Example: Set date to 2.12.2003.
Entry using keyboard:
• 02/12/2003 - Confirm with Enter
Information:
If using a German keyboard, press the "-" key (next to the Shift key) to enter "/".
Power Panel 300/400 User's Manual V 2.10
Software • Power Panel 300 with BIOS
XpressROM Setup
ESC:Exit ALT+Q:Go to Main Menu
Main Menu
Main Menu/D. Date
Figure 272: Date
ENTER:Select +/-:Choice
403