OS mode
•
Standard Boot Screen (see section 1 "Power Panel 300 with BIOS" on page 397)
•
BIOS Setup can be started by pressing the "DEL" key.
•
When the switch is in the "00" position, the setup default values will be restored after
restarting three times.
AR mode
The device will be initialized for Automation Runtime when AR mode is enabled.
•
Other boot screen (see section 2 "Power Panel 300/400 with Automation Runtime" on
page 452)
•
USB Boot "Enabled" (only in switch position "00")
Power Panel 300/400 User's Manual V 2.10
Technical data • Power Panel 400 with Automation Runtime
169