B&R Industries Power Panel 300 User Manual page 399

To make changes in the BIOS setup, the DEL key must be pressed when booting the Power
Panel device as soon as the following message appears in the upper margin of the display
(during the POST):
Press DEL for Setup
If the message disappears before DEL has been pressed
booted again in order to enter BIOS setup.
Warning!
The following general rule applies: Only modify those settings that you completely
understand. On no account should settings be changed without a good reason. The
BIOS settings have been carefully chosen by B&R to guarantee ideal performance
and reliability. Even a seemingly minor change to the settings may cause the system
to become unstable.
Information:
The settings recommended by B&R can be loaded with "Load defaults". For a list of
the default values, see Section 1.5 "BIOS default values" on page 445.
1)
The following keys help you navigate in BIOS setup:
Key
Cursor ↑
Cursor ↓
Cursor ←
Cursor →
ESC
Enter or press highlighted character
shortcut
F1 and ALT+H
Home
End
ALT+Q and ALT+X
1) A USB keyboard is required to enter characters and operate BIOS setup pages.
Power Panel 300/400 User's Manual V 2.10
Software • Power Panel 300 with BIOS
_
Figure 269: Press DEL for setup
Function
Moves to the previous item.
Go to the next item.
Moves to the previous item.
Go to the next item.
Exits the submenu.
Changes to the selected menu.
Opens up a help window that describes the possible values for the highlighted item. Press ESC to exit
the help window. In a help window, the cursor ↑, Cursor ↓, Home, End, Page Up, and Page Down
keys can be used to navigate when help texts are longer than the displayable area.
Jumps to the first BIOS menu item or object.
Jumps to the last BIOS menu item or object.
Enters the BIOS main menu.
Table 138: BIOS-relevant keys
1)
, then the Power Panel must be
399