Chapter 5: Standards And Certifications - B&R Industries Power Panel 300 User Manual

Chapter 5 • Standards and certifications
1. Applicable European guidelines
• EMC guidelines 2004/108/EG
• Low-voltage guidelines 2006/95/EG
• Machine guidelines 98/37/EG beginning 12/29/2009: 2006/42/EG
2. Overview of standards
The Power Panel 300/400 devices collectively meet the following standards:
Standard
EN 55011
Class A, B
EN 55022
Class A, B
EN 55024
Class A or B
EN 60060-2
EN 60068-2-1
EN 68068-2-2
EN 60068-2-3
EN 60068-2-6
EN 60068-2-14
EN 60068-2-27
EN 60068-2-30
EN 60068-2-31
EN 60068-2-32
EN 60204-1
EN 60529
EN 61000-4-2
Power Panel 300/400 User's Manual V 2.10
Standards and certifications • Applicable European guidelines
Description
Electromagnetic compatibility (EMC), radio disturbance product standard, industrial, scientific, and
medical high-frequency devices (ISM devices), limit values and measurement procedure; group 1
(devices that do not create HF during material processing) and group 2 (devices that create HF during
material processing)
Electromagnetic compatibility (EMC), radio disturbance characteristics, information technology
equipment (ITE devices), limits and methods of measurement
Electromagnetic compatibility (EMC), immunity characteristics, information technology equipment (ITE
devices), limits and methods of measurement
High-voltage test techniques - part 2: Measuring systems
Environmental testing - part 2: Tests; test A: Cold
Environmental testing - part 2: Tests; test B: Dry heat
Environmental testing - part 2: Tests; test and guidance: Damp heat, constant
Environmental testing - part 2: Tests; test: Vibration (sinusoidal)
Environmental testing - part 2: Tests; test N: Change of temperature
Environmental testing - part 2: Tests; test and guidance: Shock
Environmental testing - part 2: Tests; test and guidance: Damp heat, cyclic
Environmental testing - part 2: Tests; test: Drop and topple, primarily for equipment-type specimens
Environmental testing - part 2: Tests; test: Free fall
Safety of machinery, electrical equipment on machines - part 1: General requirements
Degrees of protection provided by enclosures (IP code)
Electromagnetic compatibility (EMC) - part 4-2: Testing and measuring techniques; electrostatic
discharge immunity test
Table 190: Overview of standards
485