Memory And Cache Optimization - B&R Industries Power Panel 300 User Manual

Software • Power Panel 300 with BIOS
Drive configuration
Fan
Battery
Table 167: Motherboard device configuration default values (Forts.)

1.5.2 Memory and cache optimization

Setting
Cache mode
Cache allocate
Refresh rate
1.5.3 System clock/PLL configuration
Setting
Clock determined by
CPU multiplier
RAM multiplier
1.5.4 Power management
Setting
BIOS PM at boot
APM available
ACPI available
S1 clocks
CPU clock gating
Chipset clock gating
Power button
Power loss control
1.5.5 Device information
This BIOS page is only provided for information purposes - therefore, no default BIOS values are
available.
446
Default value
-
-
Default value
Write back
Disabled
Auto
Table 168: Memory and cache optimization default values
Default value
H/W strapping
500 MHz
333 MHz
Table 169: System clock/PLL configuration default values
Default value
Disabled
Yes
Yes
Off
Enabled
Enabled
ACPI mode
Power-on
Table 170: Power management default values
Power Panel 300/400 User's Manual V 2.10