B&R Industries Power Panel 300 User Manual page 407

BIOS setting Meaning
COM D Configures the UART address range and
the corresponding interrupt for the touch
controller.
Information:
Two ports cannot use the same
address range and interrupt.
Motherboard device configuration - video and flat panel
F1/ALT+H:Show Help
Graphics Memory: 008
Output Display:
Flat Panel Configuration
Type:
Contrast:
Brightness:
Select graphics memory size. Use even numbers of MBytes only.
Figure 276: Motherboard device configuration - video and flat panel configuration
BIOS setting Meaning
Graphics memory Setting for the amount of graphics
memory reserved by the main memory.
Output display Selection of display mode
Type Displays the Power Panel display type.
Power Panel 300/400 User's Manual V 2.10
Disabled
0x3f8 IRQ 4
0x2f8 IRQ 3
0x3e8 IRQ 4
0x2e8 IRQ 3
0x3f8 IRQ 12
0x2f8 IRQ 11
0x3e8 IRQ 12
0x2e8 IRQ 11
Table 142: BIOS super I/O configuration menu (Forts.)
XpressROM Setup
ESC:Exit ALT+Q:Go to Main Menu
Graphics Configuration
Flat Panel
TFT
AUTO
AUTO
Table 143: BIOS video configuration menu
Software • Power Panel 300 with BIOS
Setting options Effect
No assignment. The touch screen is disabled and
does not function.
Use this address range and interrupt.
ENTER:Select
Setting options Effect
2-254 Manually setting the value.
Flat panel Displays on a Power Panel display.
Panel and CRT Displays on an external monitor and Power Panel
display.
None -
+/-:Choice
407