Power Button; Reset Button - B&R Industries Power Panel 300 User Manual

4.1.9 Power button

The power button can be pressed with a pointed object (i.e.
paper clip or tip of a pen).
If the Power button is pushed, the Power Panel is switched
off and remains in Standby mode.

4.1.10 Reset button

The reset button can be pressed with a pointed object (i.e.
paper clip or tip of a pen).
Pushing the reset button results in a hardware-reset. The
Power Panel restarts.
The MTCX processor is not reset when the reset button is
pressed.
Warning!
A system reset can cause data to be lost!
Power Panel 300/400 User's Manual V 2.10
Technical data • Power Panel 400 with Automation Runtime
Power button
Table 67: Power button
Reset button
Table 68: Reset button
171