1. Manuals
  2. Brands
  3. B&R Industries Manuals
  4. Touch Panel
  5. Panel PC 2100
  6. User manual

B&R Industries Panel PC 2100 User Manual

Swing arm device
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Panel PC 2100
Swing arm device
User's manual
Version: 1.02 (April 2015)
Model no.: MAPPC2100SW-ENG
All information contained in this manual is current as of its creation/publication. B&R reserves the right to change
the contents of this manual without notice. The information contained herein is believed to be accurate as of
the date of publication; however, Bernecker + Rainer Industrie-Elektronik Ges.m.b.H. makes no warranty, ex-
pressed or implied, with regard to the products or documentation contained within this manual. In addition,
Bernecker + Rainer Industrie-Elektronik Ges.m.b.H. shall not be liable for any incidental or consequential damages
in connection with or arising from the furnishing, performance or use of the product(s) in this documentation. Soft-
ware names, hardware names and trademarks are registered by their respective companies.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Panel PC 2100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for B&R Industries Panel PC 2100

Summary of Contents for B&R Industries Panel PC 2100

  • Page 1 Panel PC 2100 Swing arm device User's manual Version: 1.02 (April 2015) Model no.: MAPPC2100SW-ENG All information contained in this manual is current as of its creation/publication. B&R reserves the right to change the contents of this manual without notice. The information contained herein is believed to be accurate as of the date of publication;...
  • Page 2 Chapter 1: General information Chapter 2: Technical data Chapter 3: Installation Chapter 4: Software Chapter 5: Standards and certifications Chapter 6: Accessories Chapter 7: Maintenance and service Appendix A...

  • Page 3: Table Of Contents

    2.4.7 Power button............................33 2.4.8 Reset button............................33 2.4.9 LED status indicators..........................34 2.4.10 IF option slot (IF1, IFx)........................34 2.5 Layout of devices with buttons........................35 2.5.1 Buttons / Switching elements....................... 35 2.5.2 Button/Switch interface......................... 38 Panel PC 2100 swing arm user's manual V1.00...
  • Page 4 5.2.1 Windows Embedded 8.1 Industry Pro....................96 5.2.2 Windows 7 Professional / Ultimate.......................96 5.2.3 Windows Embedded Standard 7 Premium...................96 6 Adjusting the display brightness........................97 Chapter 4 Software....................98 1 BIOS options..............................98 1.1 General information............................ 98 Panel PC 2100 swing arm user's manual V1.00...
  • Page 5 4.4 Features with WES7 (Windows Embedded Standard 7)................. 139 4.5 Installation..............................140 4.6 Drivers...............................140 4.7 Special considerations, limitations......................140 4.8 Supported display resolutions........................140 5 Automation Runtime............................141 5.1 General information..........................141 5.2 Order data..............................141 5.3 Automation Runtime Windows (ARwin)....................141 Panel PC 2100 swing arm user's manual V1.00...
  • Page 6 2.1 0TB1210.3100............................166 2.1.1 General information..........................166 2.1.2 Order data............................166 2.1.3 Technical data.............................166 3 USB flash drives............................167 3.1 5MMUSB.xxxx-01............................. 167 3.1.1 General information..........................167 3.1.2 Order data............................167 3.1.3 Technical data.............................167 3.1.4 Temperature/Humidity diagram......................168 Panel PC 2100 swing arm user's manual V1.00...
  • Page 7 4.8 Switching element RAFIX 22 FS+ PCB gold, 1.20.126.414/0000............178 5 Touch screen..............................179 5.1 5-wire AMT touch screen (single-touch)....................179 5.1.1 Technical data.............................179 5.1.2 Temperature/Humidity diagram......................179 5.2 3M touch screen (multi-touch)........................180 5.2.1 Technical data.............................180 5.2.2 Temperature/Humidity diagram......................180 Panel PC 2100 swing arm user's manual V1.00...

  • Page 8: Chapter 1 General Information

    1.02 2015-04-17 • Updated max. specified temperature of display units, see "Temperature sensor locations" on page 23. • Updated section "Maximum ambient temperature during operation" on page 21. Table 1: Manual history Panel PC 2100 swing arm user's manual V1.00...

  • Page 9: Safety Guidelines

    Electronic devices are never completely failsafe. If the programmable control system, operating/monitoring device or uninterruptible power supply fails, the user is responsible for ensuring that other connected devices, e.g. motors, are brought to a secure state. Panel PC 2100 swing arm user's manual V1.00...

  • Page 10: Transport And Storage

    (e.g. diskette, CD-ROM, USB flash drive, etc.), a network connection or the Internet. The user is responsible for assessing these dangers, implementing preventive measures such as virus protection programs, firewalls, etc. and making sure that software is only obtained from trusted sources. Panel PC 2100 swing arm user's manual V1.00...

  • Page 11: Environmentally Friendly Disposal

    Batteries and rechargeable batteries Cables Cardboard box / Paper packaging Cardboard box / Paper recycling Plastic packaging Plastic recycling Table 2: Environmentally friendly separation of materials Disposal must comply with applicable legal regulations. Panel PC 2100 swing arm user's manual V1.00...

  • Page 12: Organization Of Safety Notices

    For 6 to 30 mm ±0.2 mm For 30 to 120 mm ±0.3 mm For 120 to 400 mm ±0.5 mm For 400 to 1000 mm ±0.8 mm Table 4: Range of nominal sizes Panel PC 2100 swing arm user's manual V1.00...

  • Page 13: Overview

    Interface card - POWERLINK - CAN - RS232 (Rx/Tx) - 32 kB FRAM System units 5PPC2100.BY01-001 Panel PC 2100 - Intel Atom E3815 1.46 GHz - Single core - 1 GB SDRAM - For Automation Panel swing arm devices 5PPC2100.BY11-001 Panel PC 2100 - Intel Atom E3825 1.33 GHz - Dual core - 1 GB SDRAM - For Automation Panel swing arm...
  • Page 14 Short description on page 5PPC2100.BY22-001 Panel PC 2100 - Intel Atom E3826 1.46 GHz - Dual core - 2 GB SDRAM - For Automation Panel swing arm devices 5PPC2100.BY34-001 Panel PC 2100 - Intel Atom E3827 1.75 GHz - Dual core - 4 GB SDRAM - For Automation Panel swing arm devices 5PPC2100.BY44-001...

  • Page 15: Chapter 2 Technical Data

    An operational Panel PC is put together by installing a system unit on a display unit. The Panel PC 2100 is mounted on a swing arm system using the integrated flange.

  • Page 16: System Components / Configuration

    Technical data • Introduction 1.3 System components / Configuration 1.3.1 Configuration The following components are required for operation as a Panel PC 2100 swing arm device: • Display unit • System unit • CFast card for the operating system • Operating system...
  • Page 17 1TG4601.06-5 5SWWI7.1200-ENG 5SWWI7.1843-MUL 5SWWI7.1200-GER 5SWWI7.1400-MUL Windows Embedded 8.1 Industry 5SWWI8.0343-MUL 5SWWI8.0443-MUL 1) Handles are not factory-installed and must be mounted after delivery. Figure 1: Panel PC 2100 swing arm device - Configuration Panel PC 2100 swing arm user's manual V1.00...

  • Page 18: Complete System

    Technical data • Complete system 2 Complete system 2.1 Mechanical characteristics 2.1.1 Dimensions Flange ø 75 ø 48.5 Figure 2: Panel PC 2100 swing arm device - Dimensions All dimensions are specified in mm. Display type Model number 15.0" single-touch 5AP92D.1505-0x 235.9 24.5...
  • Page 19 Technical data • Complete system Flange ø 75 ø 48.5 Figure 3: Panel PC 2100 swing arm device with keys - Dimensions All dimensions are specified in mm. Display type Model number 18.5" multi-touch with keys 5AP99D.185B-0x 135.7 231.5 24.5 25.5...

  • Page 20: Mounting Orientations

    2.1.2 Mounting orientations Use the adjustment lever on the flange to set the angle of rotation of the Panel PC between +45° and -45°. Figure 4: Panel PC 2100 swing arm device - Angle of rotation 2.1.3 Weight specifications All weights are specified in g (grams).

  • Page 21: Environmental Characteristics

    ✓ ✓ ✓ ✓ ✓ 1) A total derating of 5°C applies when using the 5PPC2100.BY34-001 or 5PPC2100.BY44-001 with the 5AP99D.215C-0x and 5ACCIF01.FPLS-000 or 5ACCIF.FPSC-000. Table 10: Maximum ambient temperature during operation Panel PC 2100 swing arm user's manual V1.00...
  • Page 22 3. Incorporating additional interface options and CFast cards can change the temperature limits of a PPC2100 system. 4. The mounting orientation of the Panel PC 2100 may result in limitations. For more information, see "Mounting orientations" on page 20. If there is a "✓" next to the component, it can be used at the minimum/maximum ambient temperature of the complete system without problems.
  • Page 23 Sensors monitor temperature values at many different locations in the PPC2100 swing arm device. The location of these temperature sensors is illustrated in Figure 5 "Panel PC 2100 swing arm device - Temperature sensor positions" on page 23. The values listed in "Temperature sensor locations" represent the defined maximum temperature for this measurement point.

  • Page 24: Humidity

    This value applies to a device in its original packaging. 2.2.5 Protection The Panel PC 2100 swing arm device is rated IP65 in accordance with EN 60529 on all sides under the following conditions: • The Panel PC 2100 swing arm device is installed correctly (see "Panel PC 2100 - Installation" on page •...

  • Page 25: Electrical Characteristics

    Table 18: +24 VDC voltage supply connection Electrical characteristics Nominal voltage 24 VDC ±25% Nominal current 3.5 A Starting current Typ. 6 A; max. 10 A for <300 μs Electrical isolation Uninterruptible power supply Panel PC 2100 swing arm user's manual V1.00...

  • Page 26: Power Calculation

    2.3.2 Power calculation In order to calculate the total power of the Panel PC 2100 swing arm device, the power rating of the display being used (see "Display units - Power calculation") must be added to the power ratings of the system unit being used and any connected interface options.

  • Page 27: Block Diagrams

    POWERLINK / RS232 IF option PCIe 1 FPGA POWERLINK Power down Female connector, FRAM RS232 10-pin F_I0 L2 LED L3 LED Green/Red Green/Red Figure 7: POWERLINK / RS232 IF option (5ACCIF01.FPLS-000) - Block diagram Panel PC 2100 swing arm user's manual V1.00...
  • Page 28 POWERLINK Power down Female connector, RS232 10-pin FRAM Terminating L1 LED L2 LED L3 LED Yellow Green/Red Green/Red resistor Figure 8: POWERLINK / RS232 / CAN IF option (5ACCIF01.FPSC-000) - Block diagram Panel PC 2100 swing arm user's manual V1.00...

  • Page 29: Device Interfaces And Slots

    2.4 Device interfaces and slots 2.4.1 Device interfaces - Overview Interfaces are located on the back of the Panel PC 2100. To access it, the interface cover on the back must be removed first (see "Removing the interface cover" on page 86).

  • Page 30: Vdc Voltage Supply

    The ground connection must be used, for example, to fasten a copper strip to a central grounding point in the control cabinet or system where the device is installed. The largest possible conductor cross section should be used (at least 2.5 mm²). Panel PC 2100 swing arm user's manual V1.00...

  • Page 31: Ethernet 1 Interface (Eth1)

    A special driver is required to operate the Ethernet controller. Drivers for approved operating systems are available in the Downloads section of the B&R website (www.br-automation.com). Information: Required drivers can only be downloaded from the B&R website, not from manufacturer websites. Panel PC 2100 swing arm user's manual V1.00...

  • Page 32: Usb Interfaces

    With revisions < A2 for 5PPC2100.BY44-001 system units, the max. cable length has been specified at 3 m. Front USB PPC2100 swing arm devices with keys come with a USB 2.0 interface on the front. For more information, see the section "USB interface" on page 39. Panel PC 2100 swing arm user's manual V1.00...

  • Page 33: Cfast Slot

    Pushing the reset button triggers a hardware and PCI reset. The Panel PC is restarted (cold restart). Pressing the reset button does not reset the MTCX processor. Reset button Table 29: Reset button Warning! A system reset can result in lost data! Panel PC 2100 swing arm user's manual V1.00...

  • Page 34: Led Status Indicators

    Interface card - POWERLINK - CAN - RS232 (Rx/Tx) - 32 kB FRAM IFx IF option Table 31: IF1 IF option, IFx slot Information: Interface options can only be installed and replaced by B&R. Panel PC 2100 swing arm user's manual V1.00...

  • Page 35: Layout Of Devices With Buttons

    The positions of keys and LEDs in the matrix are shown as hardware numbers. These hardware numbers can be read directly from the target system using the B&R Key Editor, B&R KCF Editor or B&R Control Center. Panel PC 2100 swing arm user's manual V1.00...
  • Page 36 Figure 12: Display - Keys and LEDs The configuration below applies to the following display units: • 5AP99D.185B-00 / -01 • 5AP99D.215C-00 / -01 • 5AP99D.240C-00 / -01 Figure 13: AP99D (landscape) - Button, switch and LED configuration Panel PC 2100 swing arm user's manual V1.00...
  • Page 37 Technical data • Complete system The configuration below applies to the following display unit: • 5AP99D.215I-00 / -01 Figure 14: AP99D (portrait) - Button, switch and LED configuration Panel PC 2100 swing arm user's manual V1.00...

  • Page 38: Button/Switch Interface

    Model number Short description Required accessories Terminal blocks 0TB1210.3100 Connector, 10-pin female, cage clamps, protected against vi- bration by the screw flange Table 32: Button/Switch interface - Pinout Figure 15: Button/Switch interface Panel PC 2100 swing arm user's manual V1.00...

  • Page 39: Usb Interface

    With revisions < A1 for 5PPC2100.BY22-001 and 5PPC2100.BY34-001 system units, the max. cable length has been specified at 2 m. With revisions < A2 for 5PPC2100.BY44-001 system units, the max. cable length has been specified at 2 m. Panel PC 2100 swing arm user's manual V1.00...

  • Page 40: Rfid Read/Write Transponder Unit

    Transponder tag, red housing, MIFARE Classic, 1 kB, 13.56 MHz read/write 5A9020.47 Transponder tag, green housing, MIFARE Classic, 1 kB, 13.56 MHz read/write 5A9020.48 Transponder tag, blue housing, MIFARE Classic, 1 kB, 13.56 MHz read/write Panel PC 2100 swing arm user's manual V1.00...

  • Page 41: Individual Components

    Housing Material Aluminum, painted Paint White aluminum Front Frame Aluminum, painted Panel overlay Material Polyester Dark gray border around display RAL 7024 Flange output Bottom Table 35: 5AP92D.1505-00, 5AP92D.1505-01 - Technical data Panel PC 2100 swing arm user's manual V1.00...
  • Page 42 3.1.1.4 Dimensions Figure 16: 5AP92D.1505-0x - Dimensions 3.1.1.5 Temperature/Humidity diagram Storage / Transport / Operation -80 -70 -60 -50 -40 -30 -20 -10 40 50 Temperature [°C] Figure 17: 5AP92D.1505-0x - Temperature/Humidity diagram Panel PC 2100 swing arm user's manual V1.00...

  • Page 43: 5Ap92D.1906-0X

    Touch screen drivers for approved operating systems are available in the Downloads section of the B&R website. Only when all covers are installed and the device is properly mounted on a swing arm. Panel PC 2100 swing arm user's manual V1.00...
  • Page 44 Technical data • Individual components 3.1.2.4 Dimensions Figure 18: 5AP92D.1906-0x - Dimensions 3.1.2.5 Temperature/Humidity diagram Operation Temperature [°C] Figure 19: 5AP92D.1906-0x - Temperature/Humidity diagram Panel PC 2100 swing arm user's manual V1.00...

  • Page 45: 5Ap93D.185B-0X

    At an ambient temperature of 25°C. Reducing the brightness by 50% can result in an approximately 50% increase in the half-brightness time. Only when all covers are installed and the device is properly mounted on a swing arm. Panel PC 2100 swing arm user's manual V1.00...
  • Page 46 Technical data • Individual components 3.1.3.4 Dimensions Figure 20: 5AP93D.185B-0x - Dimensions 3.1.3.5 Temperature/Humidity diagram Operation Temperature [°C] Figure 21: 5AP93D.185B-0x - Temperature/Humidity diagram Panel PC 2100 swing arm user's manual V1.00...

  • Page 47: 5Ap93D.215C-0X

    At an ambient temperature of 25°C. Reducing the brightness by 50% can result in an approximately 50% increase in the half-brightness time. Only when all covers are installed and the device is properly mounted on a swing arm. Panel PC 2100 swing arm user's manual V1.00...
  • Page 48 Technical data • Individual components 3.1.4.4 Dimensions 569.5 Figure 22: 5AP93D.215C-0x - Dimensions 3.1.4.5 Temperature/Humidity diagram Operation Temperature [°C] Figure 23: 5AP93D.215C-0x - Temperature/Humidity diagram Panel PC 2100 swing arm user's manual V1.00...

  • Page 49: 5Ap93D.240C-0X

    At an ambient temperature of 25°C. Reducing the brightness by 50% can result in an approximately 50% increase in the half-brightness time. Only when all covers are installed and the device is properly mounted on a swing arm. Panel PC 2100 swing arm user's manual V1.00...
  • Page 50 Technical data • Individual components 3.1.5.4 Dimensions 626.5 Figure 24: 5AP93D.240C-0x - Dimensions 3.1.5.5 Temperature/Humidity diagram Operation Temperature [°C] Figure 25: 5AP93D.240C-0x - Temperature/Humidity diagram Panel PC 2100 swing arm user's manual V1.00...

  • Page 51: 5Ap99D.185B-0X

    Projected capacitive touch (PCT) Controller Transmittance 88% ±2% Features Pushbuttons Quantity 2 (green, red) Type RAFIX 22 FS+, 1.30.270.021/2500 (green), 1.30.270.021/2300 (red) Contact element Momentary Table 45: 5AP99D.185B-00, 5AP99D.185B-01 - Technical data Panel PC 2100 swing arm user's manual V1.00...
  • Page 52 At an ambient temperature of 25°C. Reducing the brightness by 50% can result in an approximately 50% increase in the half-brightness time. Only when all covers are installed and the device is properly mounted on a swing arm. 3.1.6.4 Dimensions Figure 26: 5AP99D.185B-0x - Dimensions Panel PC 2100 swing arm user's manual V1.00...
  • Page 53 Technical data • Individual components 3.1.6.5 Temperature/Humidity diagram Operation Temperature [°C] Figure 27: 5AP99D.185B-0x - Temperature/Humidity diagram Panel PC 2100 swing arm user's manual V1.00...

  • Page 54: 5Ap99D.215C-0X

    Projected capacitive touch (PCT) Controller Transmittance 88% ±2% Features Pushbuttons Quantity 2 (green, red) Type RAFIX 22 FS+, 1.30.270.021/2500 (green), 1.30.270.021/2300 (red) Contact element Momentary Table 47: 5AP99D.215C-00, 5AP99D.215C-01 - Technical data Panel PC 2100 swing arm user's manual V1.00...
  • Page 55 At an ambient temperature of 25°C. Reducing the brightness by 50% can result in an approximately 50% increase in the half-brightness time. Only when all covers are installed and the device is properly mounted on a swing arm. 3.1.7.4 Dimensions 569.5 Figure 28: 5AP99D.215C-0x - Dimensions Panel PC 2100 swing arm user's manual V1.00...
  • Page 56 Technical data • Individual components 3.1.7.5 Temperature/Humidity diagram Operation Temperature [°C] Figure 29: 5AP99D.215C-0x - Temperature/Humidity diagram Panel PC 2100 swing arm user's manual V1.00...

  • Page 57: 5Ap99D.215I-0X

    Direction U = 89° / Direction D = 89° Backlight Type Brightness 250 cd/m² Half-brightness time 30,000 h Touch screen Type Technology Projected capacitive touch (PCT) Controller Transmittance 88% ±2% Table 49: 5AP99D.215I-00, 5AP99D.215I-01 - Technical data Panel PC 2100 swing arm user's manual V1.00...
  • Page 58 At an ambient temperature of 25°C. Reducing the brightness by 50% can result in an approximately 50% increase in the half-brightness time. Only when all covers are installed and the device is properly mounted on a swing arm. Panel PC 2100 swing arm user's manual V1.00...
  • Page 59 Technical data • Individual components 3.1.8.4 Dimensions Figure 30: 5AP99D.215I-0x - Dimensions 3.1.8.5 Temperature/Humidity diagram Operation Temperature [°C] Figure 31: 5AP99D.215I-0x - Temperature/Humidity diagram Panel PC 2100 swing arm user's manual V1.00...

  • Page 60: 5Ap99D.240C-0X

    Projected capacitive touch (PCT) Controller Transmittance 88% ±2% Features Pushbuttons Quantity 2 (green, red) Type RAFIX 22 FS+, 1.30.270.021/2500 (green), 1.30.270.021/2300 (red) Contact element Momentary Table 51: 5AP99D.240C-00, 5AP99D.240C-01 - Technical data Panel PC 2100 swing arm user's manual V1.00...
  • Page 61 At an ambient temperature of 25°C. Reducing the brightness by 50% can result in an approximately 50% increase in the half-brightness time. Only when all covers are installed and the device is properly mounted on a swing arm. 3.1.9.4 Dimensions 626.5 Figure 32: 5AP99D.240C-0x - Dimensions Panel PC 2100 swing arm user's manual V1.00...
  • Page 62 Technical data • Individual components 3.1.9.5 Temperature/Humidity diagram Operation Temperature [°C] Figure 33: 5AP99D.240C-0x - Temperature/Humidity diagram Panel PC 2100 swing arm user's manual V1.00...

  • Page 63: System Units

    Panel PC 2100 - Intel Atom E3815 1.46 GHz - Single core - 1 GB SDRAM - For Automation Panel swing arm devices 5PPC2100.BY11-001 Panel PC 2100 - Intel Atom E3825 1.33 GHz - Dual core - 1 GB SDRAM - For Automation Panel swing arm devices 5PPC2100.BY22-001 Panel PC 2100 - Intel Atom E3826 1.46 GHz - Dual core - 2 GB...
  • Page 64 The SuperSpeed transfer rate (5 Gbit/s) is only possible with USB 3.0. The interface option cannot be replaced. The maximum ambient temperature is typically derated by 1°C per 1000 meters (starting at 500 meters above sea level). Panel PC 2100 swing arm user's manual V1.00...

  • Page 65: Cfast Cards

    3.3.2.5 Calculating the expected service life for an existing application The following procedure can be used to better verify whether a CFast card with SLC or MLC technology should be used in a particular application. Panel PC 2100 swing arm user's manual V1.00...
  • Page 66 3.3.2.6 Dimensions 42.8 ±0.1 2.3 ±0.1 +0.2 -0.1 1.15 ±0.1 1 ±0.1 41.6 ±0.13 0.6 ±0.07 1 ±0.07 1 ±0.07 Bottom 1 ±0.1 6.35 33.96 ±0.15 Figure 34: CFast card - Dimensions Panel PC 2100 swing arm user's manual V1.00...

  • Page 67: 5Cfast.xxxx-00

    40 MB/s 45 MB/s 45 MB/s 45 MB/s 45 MB/s Certification cULus cULus HazLoc Class 1 Division 2 GOST-R Endurance SLC flash Table 55: 5CFAST.2048-00, 5CFAST.4096-00, 5CFAST.8192-00, 5CFAST.016G-00, 5CFAST.032G-00 - Technical data Panel PC 2100 swing arm user's manual V1.00...
  • Page 68 Yes, although applies only if all components installed within the complete system have this certification. TBW = Terabytes written. Sequential access without a file system. 3.3.3.4 Temperature/Humidity diagram Operation Temperature [°C] Figure 35: 5CFAST.xxxx-00 ≥ Rev. E0 - Temperature/Humidity diagram Panel PC 2100 swing arm user's manual V1.00...
  • Page 69 3.3.3.5 Dimensions 42.8 ±0.1 2.3 ±0.1 +0.2 -0.1 1.15 ±0.1 1 ±0.1 41.6 ±0.13 0.6 ±0.07 1 ±0.07 1 ±0.07 Bottom 1 ±0.1 6.35 33.96 ±0.15 Figure 36: CFast card - Dimensions Panel PC 2100 swing arm user's manual V1.00...

  • Page 70: 5Cfast.xxxx-10

    Operating systems Windows 7 32-bit Windows 7 64-bit Windows Embedded Standard 7, 32-bit Windows Embedded Standard 7, 64-bit Windows XP Professional Windows Embedded Standard 2009 Table 57: 5CFAST.032G-10, 5CFAST.064G-10, 5CFAST.128G-10 - Technical data Panel PC 2100 swing arm user's manual V1.00...
  • Page 71 Yes, although applies only if all components installed within the complete system have this certification. TBW = Terabytes written. Sequential access without a file system. 3.3.4.4 Temperature/Humidity diagram Operation Temperature [°C] Figure 37: 5CFAST.xxxx-10 - Temperature/Humidity diagram Panel PC 2100 swing arm user's manual V1.00...
  • Page 72 Write protection can prevent data from being deleted or changed on the CFast card. If write protection is enabled, data can only be read. Information: If an operating system is installed on the CFast card, write protection must be disabled. Disabled Enabled Panel PC 2100 swing arm user's manual V1.00...

  • Page 73: Interface Options

    Type 4 Execution Shielded RJ45 Transfer rate 100 Mbit/s Cable length Max. 100 m between two stations (segment length) Terminating resistors Electrical characteristics Power consumption 1.75 W Table 59: 5ACCIF01.FPLS-000 - Technical data Panel PC 2100 swing arm user's manual V1.00...
  • Page 74 This interface (if available) is enabled automatically in BIOS on the APC2100 / PPC2100 as COM A with default I/O address 3F8h and IRQ 4. This interface is referred to as IF5 in Automation Studio / Automation Runtime. Panel PC 2100 swing arm user's manual V1.00...
  • Page 75 (timeout), then the module switches immediately to BASIC_ETHERNET mode (flickering). If POW- ERLINK communication is detected before this time expires, however, the interface switches immediately to PRE_OPERATIONAL_1 mode (single flash). Table 65: Status/Error LED - POWERLINK - Status Panel PC 2100 swing arm user's manual V1.00...
  • Page 76 The firmware is a component of Automation Studio. The module is updated to this version automatically. To update the firmware included in Automation Studio, the hardware must be upgraded (see "Project manage- ment" / "Automation Studio upgrade" in the Automation Studio help system). Panel PC 2100 swing arm user's manual V1.00...

  • Page 77: 5Accif01.Fpsc-000

    Can be enabled or disabled using a sliding switch Electrical characteristics Power consumption 1.75 W Environmental conditions Temperature Operation -20 to 55°C Storage -20 to 60°C Transport -20 to 60°C Table 68: 5ACCIF01.FPSC-000 - Technical data Panel PC 2100 swing arm user's manual V1.00...
  • Page 78 This interface can only be used in Automation Runtime and is referred to as IF5 in Automation Studio / Automation Runtime. It is not a "PC interface" and therefore not shown in BIOS on APC2100 / PPC2100 systems. Panel PC 2100 swing arm user's manual V1.00...
  • Page 79 Ethernet mode In this mode, the interface is operated as an Ethernet interface. Green - Status Description Interface being operated as an Ethernet interface Table 73: Status/Error LED - Ethernet mode Panel PC 2100 swing arm user's manual V1.00...
  • Page 80 LED lit red in this mode indicates failure of the MN. Mode OPERATIONAL The interface is in OPERATIONAL mode. PDO mapping is active and cyclic data is being evaluated. Table 75: Status/Error LED - POWERLINK - Status Panel PC 2100 swing arm user's manual V1.00...
  • Page 81 The firmware is a component of Automation Studio. The module is updated to this version automatically. To update the firmware included in Automation Studio, the hardware must be upgraded (see "Project manage- ment" / "Automation Studio upgrade" in the Automation Studio help system). Panel PC 2100 swing arm user's manual V1.00...

  • Page 82: Handles

    3.5.1 5AC903.HDL0-0x 3.5.1.1 General information Handles can be installed on the side of the Panel PC 2100 swing arm device to improve its ergonomic properties and ease of use. Handles are not factory-installed and must be mounted after delivery. For more information regarding installation, see the section "Installing the handles"...

  • Page 83: Chapter 3 Installation

    The swing arm shaft must have an outer diameter of 47.5 to 48.4. The end of the swing arm shaft that connects with the flange must be beveled at a 45° angle and deburred. Panel PC 2100 swing arm user's manual V1.00...
  • Page 84 2. Feed the necessary cables through the swing arm shaft. Compression ring Rotary ring (with catch) Swing arm shaft Figure 40: Feeding cables through the swing arm shaft Panel PC 2100 swing arm user's manual V1.00...

  • Page 85: Separate Delivery Of Components

    3. Connect the Panel PC to the swing arm system. The catch on the lower ring must fit perfectly into the filed part of the flange. The Panel PC 2100 has been installed correctly if the upper ring is flush with the flange.

  • Page 86: Removing The Interface Cover

    4. Replace the interface cover on the Panel PC using the 9 to 12 Torx screws (T10) removed earlier (0.6 Nm tightening torque). The interface cover must be installed correctly to ensure IP65 protection. Panel PC 2100 swing arm user's manual V1.00...

  • Page 87: Connecting The Cables

    4. Replace the interface cover on the Panel PC using the 9 to 12 Torx screws (T10) removed earlier (0.6 Nm tightening torque). The interface cover must be installed correctly to ensure IP65 protection. Panel PC 2100 swing arm user's manual V1.00...

  • Page 88: Replacing A System Unit

    5. Disconnect the Panel PC from the swing arm system by following the steps provided under item 3 in the section "Panel PC 2100 - Installation" on page 83 in reverse order. 6. Place the Panel PC on a clean, flat surface.
  • Page 89 11. Replace the interface cover on the Panel PC using the 9 to 12 Torx screws (T10) removed earlier (0.6 Nm tightening torque). The interface cover must be installed correctly to ensure IP65 protection. Panel PC 2100 swing arm user's manual V1.00...

  • Page 90: Installing The Handles

    8. Insert the handle (③) with the mounted centering plates (②) in the mounting holes. 9. Insert the Torx screws (⑤, T20) through the previously mounted components and tighten with a max. tight- ening torque of 1.27 Nm. Figure 48: Installing the handles Panel PC 2100 swing arm user's manual V1.00...

  • Page 91: Connecting To The Power Mains

    Please note the pinout of the power supply connector on the device! Installing a cage clamp terminal block Cage clamps DC power cable 24 VDC Functional ground 0 VDC Terminal contacts Terminal block Figure 50: Installing a cage clamp terminal block Panel PC 2100 swing arm user's manual V1.00...

  • Page 92: Connecting The Power Supply To A B&R Device

    0TB103.9 or 0TB103.91 terminal block, then a cable with maximum 1.5 mm² per connection is possible. • Note the line shielding concept. All data cables connected to the device must be shielded. Symbol indicating functional ground on the B&R device: Panel PC 2100 swing arm user's manual V1.00...
  • Page 93 Installation • Connecting to the power mains Control cabinet Ground connection Power supply Grounding strip Min. 2.5 mm² Min. 1.5 mm² Figure 52: Panel PC 2100 swing arm device - Grounding concept Panel PC 2100 swing arm user's manual V1.00...

  • Page 94: Cable Connections

    The maximum torque for the locating screws is 0.5 Nm. Locating screws Flex radius Locating screws Figure 53: Flex radius - Cable connection Information: The specified flex radius is listed in the technical data for the respective cable. Panel PC 2100 swing arm user's manual V1.00...

  • Page 95: Switching On The Device For The First Time

    5. Replace the interface cover on the Panel PC using the 9 to 12 Torx screws (T10) removed earlier (0.6 Nm tightening torque). The interface cover must be installed correctly to ensure IP65 protection. Panel PC 2100 swing arm user's manual V1.00...

  • Page 96: Touch Screen Calibration

    Microsoft multi-touch drivers are installed when Windows Embedded Standard 7 Premium is installed on the device. Once the installation of Windows Embedded Standard 7 Premium has completed, the device can be operated immediately. Panel PC 2100 swing arm user's manual V1.00...

  • Page 97: Adjusting The Display Brightness

    The configured brightness is separate from the value configured in BIOS Setup, i.e. the value in BIOS is used until Windows boots. The value from BIOS is only applied the first time the Control Center is launched. Panel PC 2100 swing arm user's manual V1.00...

  • Page 98: Chapter 4 Software

    To enter BIOS Setup, press the <Del> key after the USB controller has been initialized as soon as the following message appears on the screen (during POST): "F2 = Setup". Figure 55: Boot screen 1.3 BIOS default settings Configuration options in bold typeface represent the default value. Panel PC 2100 swing arm user's manual V1.00...

  • Page 99: Bios Setup Keys

    Jumps to the last BIOS menu item or object Resets any changes Loads and configures CMOS default values for all BIOS settings Saves and exits Exits a submenu Table 81: BIOS-relevant keys Panel PC 2100 swing arm user's manual V1.00...

  • Page 100: Main

    The currently configured system time setting. Change the system time Sets system time format This is buffered by the CMOS battery when the Hour:Minute:Second (hh:mm:ss) system is switched off. Table 82: Main Panel PC 2100 swing arm user's manual V1.00...

  • Page 101: System Information

    Displays the size of all main memory None Displays the size of the main memory in slot 1 None Displays the size of the main memory in slot 2 None Table 83: Main - System information Panel PC 2100 swing arm user's manual V1.00...

  • Page 102: Advanced

    Configures miscellaneous settings Enter Opens this submenu tion See "Miscellaneous configuration" on page 124. Thermal configuration Configures temperature settings Enter Opens this submenu See "Thermal configuration" on page 125. Table 84: Advanced Panel PC 2100 swing arm user's manual V1.00...

  • Page 103: Oem Features

    See "Display board features" on page 109. IF board features Displays device-specific information for the IF Enter Opens this submenu option See "IF board features" on page 113. Table 85: Advanced - OEM features Panel PC 2100 swing arm user's manual V1.00...
  • Page 104 Option for setting the behavior after a power fail- Stay off Does not start the PC on power-on Power On Restarts the PC on power-on Test interface None Table 86: Advanced - OEM features - Miscellaneous configuration Panel PC 2100 swing arm user's manual V1.00...
  • Page 105 Allows any I/O address to be entered Sets and displays the IRQ 3, 4, 5, 6, 7, 10, 11, 12, 14, 15 Manual assignment Table 87: Advanced - OEM features - Super I/O configuration Panel PC 2100 swing arm user's manual V1.00...
  • Page 106 See "Statistical values" on page 107. Temperature values Displays current temperature values Enter Opens this submenu See "Temperature values" on page 108. Table 88: Advanced - OEM features - System board features Panel PC 2100 swing arm user's manual V1.00...
  • Page 107 Displays the runtime in hours None Power on cycles Displays the number of power-on cycles. Each None restart increases the counter by one. Table 89: Advanced - OEM features - System board features - Statistical values Panel PC 2100 swing arm user's manual V1.00...
  • Page 108 Displays the current temperature of sensor 2 None (system unit sensor 1) in °C and °F (sensor near the CPU) Table 90: Advanced - OEM features - System board features - Temperature values Panel PC 2100 swing arm user's manual V1.00...
  • Page 109 See "Temperature values" on page 111. Panel #15 Displays the panel properties of the display unit Enter Opens this submenu See "Panel #15" on page 112. Table 91: Advanced - OEM features - Display board features Panel PC 2100 swing arm user's manual V1.00...
  • Page 110 Displays the runtime in hours None Power on cycles Displays the number of power-on cycles. Each None restart increases the counter by one. Table 92: Advanced - OEM features - Display board features - Statistical values Panel PC 2100 swing arm user's manual V1.00...
  • Page 111 Configuration options Effect Sensor 1 Displays the current temperature of sensor 1 None (display or panel) in °C and °F Table 93: Advanced - OEM features - Display board features - Temperature values Panel PC 2100 swing arm user's manual V1.00...
  • Page 112 Displays the available keys and LEDs for the None display unit Temperature Displays the temperature of the display unit in None °C and °F Table 94: Advanced - OEM features - Display board features - Panel #15 Panel PC 2100 swing arm user's manual V1.00...
  • Page 113 Parent compatibility ID Displays the manufacturer ID None Statistical values Displays statistical values Enter Opens this submenu See "Statistical values" on page 114. Table 95: Advanced - OEM features - IF board features Panel PC 2100 swing arm user's manual V1.00...
  • Page 114 Displays the runtime in hours None Power on cycles Displays the number of power-on cycles. Each None restart increases the counter by one. Table 96: Advanced - OEM features - IF board features - Statistical values Panel PC 2100 swing arm user's manual V1.00...

  • Page 115: Cpu Configuration

    Technology nology is supported. CPU power management CPU energy settings configuration Enter Opens this submenu See "CPU power management" on page 116. Table 97: Advanced - CPU configuration PROCHOT = Processor hot. Panel PC 2100 swing arm user's manual V1.00...
  • Page 116 Maximum C-State C1. Processor is in sleep mode, switch between C0 and C1. Table 98: Advanced - CPU configuration - CPU power management This setting is only possible if C-States is set to Enabled. Panel PC 2100 swing arm user's manual V1.00...

  • Page 117: Graphics (Igd) Configuration

    Enables this function. EMC behavior can be im- proved. IGD - LCD control Configures PPC2100 display settings Enter Opens this submenu See "IGD - LCD control" on page 118. Table 99: Advanced - Graphics (IGD) configuration Panel PC 2100 swing arm user's manual V1.00...
  • Page 118 DVI monitors are reconnected, even if only one of them was con- nected and enabled during a previous boot. Table 100: Advanced - Graphics (IGD) configuration - IGD configuration Panel PC 2100 swing arm user's manual V1.00...

  • Page 119: Lan

    Disables this function. The Ethernet controller board Ethernet controller (ETH1) cannot switch on the system. Enabled Enables this function. The Ethernet controller can switch on the system. Table 101: Advanced - LAN Panel PC 2100 swing arm user's manual V1.00...

  • Page 120: Pci Express Configuration

    PCI Express root port 3 Configures PCI Express settings on port 3 Enter Opens this submenu (ETH1) (ETH1) See "PCI Express root port" on page 121. Table 102: Advanced - PCI express configuration Panel PC 2100 swing arm user's manual V1.00...
  • Page 121 Assign INT to root port Option for enabling/disabling the IRQ for the Enabled Enables this function root port Disabled Disables this function Table 103: Advanced - PCI Express configuration - PCI Express root port Panel PC 2100 swing arm user's manual V1.00...

  • Page 122: Usb Configuration

    Enables this USB interface USB port #3 Option for enabling/disabling the multi-touch or Disabled Disables this USB interface the optional front USB interface Enabled Enables this USB interface Table 104: Advanced - USB configuration Panel PC 2100 swing arm user's manual V1.00...

  • Page 123: Sata Configuration

    Enabled Enables hot plugging for SATA interface 1. De- bility terface 1 vices can be connected/disconnected during operation. Disabled Disables hot plugging for SATA interface 1 Table 105: Advanced - SATA configuration Panel PC 2100 swing arm user's manual V1.00...

  • Page 124: Miscellaneous Configuration

    4 GB. There is therefore less memory available (by the MMIO size) on systems with 4 GB main mem- ory. This is not the case with 64-bit operat- ing systems. Table 106: Advanced - Miscellaneous configuration Panel PC 2100 swing arm user's manual V1.00...

  • Page 125: Thermal Configuration

    63°C / 145°F, 71°C / 160°F, 79°C / 174°F, 85°C / 185°F, 87°C / 189°F, 90°C / 194°F, 95°C / 203°F, 103°C / 217°F Disabled Disables this function Table 107: Advanced - Thermal configuration Panel PC 2100 swing arm user's manual V1.00...

  • Page 126: Security

    Enabled Requires the user password to be entered when booting Table 108: Security This setting can only be configured if a supervisor password has been set. Panel PC 2100 swing arm user's manual V1.00...

  • Page 127: Boot

    Configures the boot order Enter Opens this submenu See "Boot device priority" on page 128. Boot configuration Configures the boot settings Enter Opens this submenu See "Boot configuration" on page 129. Table 109: Boot Panel PC 2100 swing arm user's manual V1.00...

  • Page 128: Boot Device Priority

    The order is changed with "+" and USBHDD (P0): "-". "Shift + 1" enables/disables a boot device. USBHDD (P1): USBHDD (P2): USBHDD (P3): ATAPI CD: SATA HDD1: PCI LAN: Internal shell Table 110: Boot - Boot device priority Panel PC 2100 swing arm user's manual V1.00...

  • Page 129: Boot Configuration

    VT100 Enables the VT100 convention (ASCII charac- ter set) VT100+ Enables the VT100+ convention (ASCII charac- ter set and support for color, function keys, etc) Table 111: Boot - Boot configuration Panel PC 2100 swing arm user's manual V1.00...

  • Page 130: Exit

    Table 111: Boot - Boot configuration This setting is only possible if Console redirection is set to Enabled. This setting is only possible if Legacy boot is set to Enabled. 1.9 Exit Figure 86: Exit Panel PC 2100 swing arm user's manual V1.00...
  • Page 131 (provided they have not yet been saved). Save changes Selecting this option saves any changes made Yes/No to CMOS after confirmation. Table 112: Exit Panel PC 2100 swing arm user's manual V1.00...

  • Page 132: Allocation Of Resources

    Table 115: IRQ interrupt assignments in PIC mode Advanced Configuration and Power Interface. Automation Panel 923 resistive touch screen. Monitor/Panel option, SDL/DVI transmitter. 5ACCIF01.FPLS-000 IF option, COM A. IF option. ● ... Default setting ○ ... Optional setting Panel PC 2100 swing arm user's manual V1.00...

  • Page 133: Interrupt Assignments In Apic Mode

    APIC IRQ 19 PIRQ E XHCI APIC IRQ 20 PIRQ F APIC IRQ 21 PIRQ G APIC IRQ 22 PIRQ H USB EHCI APIC IRQ 23 Figure 87: PCIe routing with enabled APIC Panel PC 2100 swing arm user's manual V1.00...

  • Page 134: Windows Embedded 8.1 Industry Pro

    Shell launcher Configurable Toast Notification Filter Configurable USB filter Configurable ✓ Unified Write Filter Windows 8 Application Launcher Configurable Gesture filter Configurable Table 118: Device functions in Windows Embedded 8.1 Industry Pro Panel PC 2100 swing arm user's manual V1.00...

  • Page 135: Installation

    Personalization is not possible, however (e.g. setting the desktop background). The product can be activated at a later time either over the phone or via the Internet. Instructions for doing so can be found on the Microsoft website. Panel PC 2100 swing arm user's manual V1.00...

  • Page 136: Contents Of The Recovery Dvd

    In accordance with Microsoft requirements, Windows Embedded 8.1 Industry Pro requires XGA resolution (1024 x 768) or higher in order to allow unimpeded operation of the Windows user interface (including system dialog boxes and apps, etc.). A lower resolution can be selected for applications. Panel PC 2100 swing arm user's manual V1.00...

  • Page 137: Windows 7

    Bay Trail PPC2100 5SWWI7.1300-MUL Ultimate APC510 945GME 32-bit Multilingual 16 GB 1 GB APC511 GM45 APC810 QM77/HM76 APC910 NM10 APC2100 US15W PPC800 Bay Trail PPC900 PPC2100 PP500 Table 120: Windows 7 - Overview Panel PC 2100 swing arm user's manual V1.00...

  • Page 138: Installation

    In accordance with Microsoft requirements, Windows 7 requires XGA resolution (1024 x 768) or higher in order to allow unimpeded operation of the Windows user interface (including system dialog boxes, etc.). A lower resolution can be selected for applications. Panel PC 2100 swing arm user's manual V1.00...

  • Page 139: Windows Embedded Standard 7

    ✓ ✓ ✓ File-Based Write Filter (FBWF) ✓ ✓ Administrator accounts User accounts Configurable Configurable Table 122: Device functions in Windows Embedded Standard 7 64-bit versions are not supported by all systems. Panel PC 2100 swing arm user's manual V1.00...

  • Page 140: Installation

    In accordance with Microsoft requirements, Windows Embedded Standard 7 requires XGA resolution (1024 x 768) or higher in order to allow unimpeded operation of the Windows user interface (including system dialog boxes and apps, etc.). A lower resolution can be selected for applications. Panel PC 2100 swing arm user's manual V1.00...

  • Page 141: Automation Runtime

    The following software versions (or higher) are required to operate Automation Runtime Embedded on a Panel PC 2100: • ARemb upgrade AR A4.10 • Automation Studio V4.1.4.0 • Visual Components Runtime (VC) V4.15.0 • Process Visualization Interface (PVI) V4.1.5 Panel PC 2100 swing arm user's manual V1.00...

  • Page 142: Technology Guarding

    Licensing with the Technology Guarding wizard is available in Automation Studio 4.1 and Automation Runtime 4.08 and higher. Earlier versions of Automation Runtime do not require a Technology Guard. Additional information about Technology Guarding can be found in the Automation Studio help system. Panel PC 2100 swing arm user's manual V1.00...

  • Page 143: R Automation Device Interface (Adi) - Control Center

    • Updating and backing up BIOS and firmware • Creating reports about the current system (support assistance) • Setting the SDL equalizer value when adjusting SDL cables • Changing the user serial ID Panel PC 2100 swing arm user's manual V1.00...

  • Page 144: Installation

    If a more current ADI driver version exists (see the Downloads section of the B&R website), it can be installed later. It is important that Enhanced Write Filter (EWF) is disabled for this. Panel PC 2100 swing arm user's manual V1.00...

  • Page 145: R Automation Device Interface (Adi) Development Kit

    • Automation PC 820 • Automation PC 910 • Automation PC 2100 • Panel PC 300 • Panel PC 700 • Panel PC 800 • Panel PC 900 • Panel PC 2100 Panel PC 2100 swing arm user's manual V1.00...
  • Page 146 A detailed description of how to use ADI functions can be found in the help system. The B&R Automation Device Interface (ADI) development kit is available at no cost in the Downloads section of the B&R website (www.br-automation.com). Panel PC 2100 swing arm user's manual V1.00...

  • Page 147: R Automation Device Interface (Adi) .Net Sdk

    • Automation PC 2100 • Panel PC 300 • Panel PC 700 • Panel PC 800 • Panel PC 900 • Panel PC 2100 • Power Panel 100/200 • Power Panel 300/400 Panel PC 2100 swing arm user's manual V1.00...
  • Page 148 B&R images of embedded operating systems. A detailed description of how to use ADI functions can be found in the help system. The ADI .NET SDK is available in the Downloads section of the B&R website (www.br-automation.com). Panel PC 2100 swing arm user's manual V1.00...

  • Page 149: R Key Editor

    • Automation PC 511 • Automation PC 620 • Automation PC 810 • Automation PC 820 • Automation PC 910 • Automation PC 2100 • Automation Panel 800 • Automation Panel 830 Panel PC 2100 swing arm user's manual V1.00...
  • Page 150 A detailed guide for configuring keys and LEDs can be found in the B&R Key Editor's help system. The B&R Key Editor is available at no cost in the Downloads section of the B&R website (www.br-automation.com). It can also be found on the B&R HMI Drivers & Utilities DVD (model number 5SWHMI.0000-00). Panel PC 2100 swing arm user's manual V1.00...

  • Page 151: Rfid Command Set

    Error messages are constructed as follows: "Error: <ErrorNumber> (error syntax)" There is a difference between operating errors and RFID stack error messages. See the section "Error messages and numbers" on page 158. Panel PC 2100 swing arm user's manual V1.00...

  • Page 152: Mifare Configuration

    This documentation will not go into further detail with regard to the value blocks of tags. For more information, see "MIFARE standard card IC MF1 IC S50 functional specification" data sheet. 10.2.4 Access rights There are various options for parameter 2 depending on the configuration. Panel PC 2100 swing arm user's manual V1.00...

  • Page 153: General Commands

    Displays software and hardware revision information Show_Status Displays the RFID stack error Show_SN Displays the active tag number Show_Key Displays the active key Echo_On Displays an input echo for the output Table 129: General commands Panel PC 2100 swing arm user's manual V1.00...

  • Page 154: Update Commands

    Writing data to block 5 with key A from the reader's EEPROM sector 0: write,a,0,5,0123456789ABCDEF0123456789ABCDEF Response: Command write -> Data in sector 1 Block 5 written=0123456789ABCDEF0123456789ABCDEF Reading from block 5 with key A from the reader's EEPROM sector 0: read,a,0,5 Response: Panel PC 2100 swing arm user's manual V1.00...
  • Page 155 Reading blocks 0 to 3 read_blocks,a,0,0,3 Response: Command read_blocks -> Data in block 0 in HEX=3B7CF4E05388040046B9949745302809 Data in block 1 in HEX=00000000000000000000000000000000 Data in block 2 in HEX=00000000000000000000000000000000 Data in block 3 in HEX=000000000000FF078069FFFFFFFFFFFF Panel PC 2100 swing arm user's manual V1.00...

  • Page 156: Iso 15693 Configuration

    AFI (afi) length Mask (mask) (bitlength) Stay_Quiet PICC enters quite mode Serial number (sn) Reset_To_Ready PICC exits quiet mode Serial number (sn) Reset_Quiet All PICCs exit quiet mode Table 134: ISO 15693 commands Panel PC 2100 swing arm user's manual V1.00...

  • Page 157: Memory Organization

    Reset_To_Ready sn [hex]: 8-byte UID of tag The filter of the tag is reset and reappears with the inventory command. Reset_Quiet This command resets ALL filters that were set previously with Stay_Quiet. Panel PC 2100 swing arm user's manual V1.00...

  • Page 158: Error Messages And Numbers

    Reader FPGA Box DL component code 0x34XX PH_COMP_DL_MSTAMPOSC Master Amplifier Oscilloscope DL component code 0x35XX PH_COMP_DL_STEPPER Stepper DL component code 0xE0XX PH_COMP_CIDMANAGER Cid Manager component code Table 136: RFID stack high byte error messages Panel PC 2100 swing arm user's manual V1.00...
  • Page 159 Reading/Writing a parameter would produce an overflow 0xXX23 PH_ERR_UNSUPPORTED_PARAMETER Parameter not supported 0xXX24 PH_ERR_UNSUPPORTED_COMMAND Command not supported 0xXX25 PH_ERR_USE_CONDITION Condition of use not satisfied 0xXX26 PH_ERR_KEY Key error Table 137: RFID stack low byte error messages Panel PC 2100 swing arm user's manual V1.00...

  • Page 160: Updating Firmware

    • Wait for the reader to restart. • Wait for the information to be verified. • The update is completed. This appears as follows in the terminal program: Figure 92: Terminal view 1 Figure 93: Terminal view 2 Panel PC 2100 swing arm user's manual V1.00...

  • Page 161: Chapter 5 Standards And Certifications

    EN 61131-2:2007 Programmable logic controllers - Part 2: Equipment requirements and tests EN 60204-1:2006 + Safety of machinery - Electrical equipment of machines - Part 1: General require- A1:2009 ments Panel PC 2100 swing arm user's manual V1.00...

  • Page 162: Certifications

    RFID read/write unit. In addition to the additional sticker for products with an RFID read/write unit, the requirements below also apply. Information: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Panel PC 2100 swing arm user's manual V1.00...
  • Page 163 • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. Panel PC 2100 swing arm user's manual V1.00...

  • Page 164: Chapter 6 Accessories

    0.20 to 2.50 mm² Fine strand wires 0.20 to 1.50 mm² 0.20 to 2.50 mm² With wire end sleeves 0.20 to 1.50 mm² Tightening torque 0.4 Nm Table 139: 0TB103.9, 0TB103.91 - Technical data Panel PC 2100 swing arm user's manual V1.00...
  • Page 165 Yes, although applies only if all components installed within the complete system have this certification. Cage clamp terminal blocks cannot be used side-by-side. The limit data for each I/O module must be taken into consideration. Panel PC 2100 swing arm user's manual V1.00...

  • Page 166: Terminal Block For The Button/Switch Interface

    0.14 to 1.5 mm² Electrical characteristics Nominal voltage 300 V Nominal current 10 A Table 141: 0TB1210.3100 - Technical data The limit data for each I/O module must be taken into consideration. Panel PC 2100 swing arm user's manual V1.00...

  • Page 167: Usb Flash Drives

    Connection cycles >1,500 Support Operating systems Windows 7 Windows XP Professional Windows XP Embedded Windows ME Windows 2000 Windows CE 5.0 Windows CE 4.2 Table 143: 5MMUSB.2048-01, 5MMUSB.4096-01 - Technical data Panel PC 2100 swing arm user's manual V1.00...

  • Page 168: Temperature/Humidity Diagram

    67.85 mm Height 8.35 mm Table 143: 5MMUSB.2048-01, 5MMUSB.4096-01 - Technical data Indicates data being transferred (sending and receiving). 3.1.4 Temperature/Humidity diagram Storage Operation Transport Temperature [°C] Figure 94: 5MMUSB.xxxx-01 - Temperature/Humidity diagram Panel PC 2100 swing arm user's manual V1.00...

  • Page 169: Chapter 7 Maintenance And Service

    (ethanol). The cleaning agent should be applied to the cloth beforehand, not sprayed directly on the device! Aggressive solvents, chemicals, scouring agents, pressurized air or steam jets should never be used. Information: Displays with a touch screen should be cleaned regularly. Panel PC 2100 swing arm user's manual V1.00...

  • Page 170: Tips For Extending The Service Life Of The Display

    • By using a screensaver 3 Pixel errors Information: Displays may contain defective pixels (dead/stuck pixels) that result from the manufacturing process. These flaws are not grounds for reclamation or initiating a warranty claim. Panel PC 2100 swing arm user's manual V1.00...

  • Page 171: Abbreviations

    Table 144: Abbreviations in this user's manual 2 Viewing angles Viewing angle specifications (R, L, U, D) for the display types are listed in the technical data for each device. Facing 6 o'clock Panel PC 2100 swing arm user's manual V1.00...

  • Page 172: Chemical Resistance

    Touch screen Panel overlay (frame) Figure 95: Single-touch display unit with Autotex panel overlay Single-touch display units < Revision B0 featured the aluminum panel overlay. Multi-touch display units feature an edge-to-edge glass surface. Panel PC 2100 swing arm user's manual V1.00...

  • Page 173: Panel Overlay Autotex (Polyester)

    • Sodium bisulphate • Xylene • Diesel • Sodium carbonate The panel overlay conforms to DIN 42115 Part 2 for exposure to glacial acetic acid for less than one hour without visible damage. Panel PC 2100 swing arm user's manual V1.00...

  • Page 174: Aluminum Panel Overlay

    • Sidolin • Diesel • Sodium hydroxide <40% • Skydrol • Acetic acid <50% • Petroleum The lacquered aluminum front is not resistant to the following chemicals: • Acetone • Ethyl acetate Panel PC 2100 swing arm user's manual V1.00...

  • Page 175: Touch Screen

    • Lysol • Water • Hydrochloric acid <6% • Methylbenzene • White wine vinegar • Coca-Cola • Methyl ethyl ketone • Windex Original • Dimethylbenzene • Naphtha • Ethanol • Nitric acid <70% Panel PC 2100 swing arm user's manual V1.00...

  • Page 176: Features

    RAFI Type RAFIX 22 FS+ Manufacturer number 1.30.272.102/2200 Quantity Illumination White Contact function Maintained Angle of rotation 1 x 90°, L form Lifespan 300,000 B10 value 400,000 Table 148: Selector switch 1.30.272.102/2200 Panel PC 2100 swing arm user's manual V1.00...

  • Page 177: Key Switch Rafix 22 Fs+, 1.30.255.222/0000

    Min. AC/DC operating voltage Max. AC/DC operating voltage 35 V Min. AC/DC operating current 1 mA Max. AC/DC operating current 100 mA Max. switching capacity 250 mW Table 151: Switching element 1.20.126.005/0000 Panel PC 2100 swing arm user's manual V1.00...

  • Page 178: Switching Element Rafix 22 Fs+ Pcb Gold, 1.20.126.414/0000

    Min. AC/DC operating voltage Max. AC/DC operating voltage 35 V Min. AC/DC operating current 1 mA Max. AC/DC operating current 100 mA Max. switching capacity 250 mW Table 152: Switching element 1.20.126.414/0000 Panel PC 2100 swing arm user's manual V1.00...

  • Page 179: Touch Screen

    Table 153: 5-wire AMT touch screen - Technical data 5.1.2 Temperature/Humidity diagram Operation -80 -70 -60 -50 -40 -30 -20 -10 40 50 Temperature [°C] Figure 96: 5-wire AMT touch screen - Temperature/Humidity diagram Panel PC 2100 swing arm user's manual V1.00...

  • Page 180: Touch Screen (Multi-Touch)

    90% at max. 35°C Operating conditions Activation Finger, thin glove, 3M Smart Pen Table 154: 3M touch screen - Technical data 5.2.2 Temperature/Humidity diagram Operation Temperature [°C] Figure 97: 3M touch screen - Temperature/Humidity diagram Panel PC 2100 swing arm user's manual V1.00...
  • Page 181 Panel PC 2100 swing arm device - Configuration..............17 Figure 2: Panel PC 2100 swing arm device - Dimensions..............18 Figure 3: Panel PC 2100 swing arm device with keys - Dimensions........... 19 Figure 4: Panel PC 2100 swing arm device - Angle of rotation............20 Figure 5: Panel PC 2100 swing arm device - Temperature sensor positions........
  • Page 182 5MMUSB.xxxx-01 - Temperature/Humidity diagram............168 Figure 97: Single-touch display unit with Autotex panel overlay............172 Figure 98: 5-wire AMT touch screen - Temperature/Humidity diagram..........179 Figure 99: 3M touch screen - Temperature/Humidity diagram............. 180 Panel PC 2100 swing arm user's manual V1.00...
  • Page 183 5PPC2100.BY01-001, 5PPC2100.BY11-001, 5PPC2100.BY22-001, 5PPC2100.BY34-001, 5PPC2100.BY44-001 - Order data..................... 63 Table 53: 5PPC2100.BY01-001, 5PPC2100.BY11-001, 5PPC2100.BY22-001, 5PPC2100.BY34-001, 5PPC2100.BY44-001 - Technical data..................63 Table 54: 5CFAST.2048-00, 5CFAST.4096-00, 5CFAST.8192-00, 5CFAST.016G-00, 5CFAST.032G-00 - Or- der data............................67 Panel PC 2100 swing arm user's manual V1.00...
  • Page 184 Table 104: Advanced - USB configuration....................122 Table 105: Advanced - SATA configuration....................123 Table 106: Advanced - Miscellaneous configuration.................. 124 Table 107: Advanced - Thermal configuration.................... 125 Table 108: Security............................126 Table 109: Boot............................127 Panel PC 2100 swing arm user's manual V1.00...
  • Page 185 E-stop 1.30.273.502/0300......................177 Table 151: Switching element 1.20.126.005/0000..................177 Table 152: Switching element 1.20.126.414/0000..................178 Table 153: 5-wire AMT touch screen - Technical data................179 Table 154: 3M touch screen - Technical data.................... 180 Panel PC 2100 swing arm user's manual V1.00...
  • Page 186 5CFAST.8192-00..............................67 5MMUSB.2048-01..............................167 5MMUSB.4096-01..............................167 5PPC2100.BY01-001............................. 63 5PPC2100.BY11-001............................. 63 5PPC2100.BY22-001............................. 63 5PPC2100.BY34-001............................. 63 5PPC2100.BY44-001............................. 63 5SWWI7.1100-ENG..............................137 5SWWI7.1100-GER..............................137 5SWWI7.1200-ENG............................. 137 5SWWI7.1200-GER............................. 137 5SWWI7.1300-MUL..............................137 5SWWI7.1400-MUL..............................137 5SWWI7.1543-ENG............................. 139 5SWWI7.1643-ENG............................. 139 5SWWI7.1743-MUL..............................139 5SWWI7.1843-MUL..............................139 5SWWI8.0343-MUL..............................134 5SWWI8.0443-MUL..............................134 Panel PC 2100 swing arm user's manual V1.00...
  • Page 187 BIOS default settings............................98 BIOS Setup keys..............................99 Blink code................................34 Cable connections..............................94 Cabling.................................. 87 CAN bus - IFx..............................79 CAN bus interface............................77, 79 CE mark................................161 Certifications............................... 162 FCC................................162 Panel PC 2100 swing arm user's manual V1.00...
  • Page 188 Electrical components with a housing....................... 9 Electrical components without a housing......................9 Individual components............................9 Packaging................................9 E-stop.................................. 177 ETH1..................................31 ETH2..................................31 Ethernet 1 interface.............................. 31 Ethernet 2 interface.............................. 31 Ethernet controller............................31, 31 Panel PC 2100 swing arm user's manual V1.00...
  • Page 189 +24 VDC voltage supply..........................25, 30 CFast slot................................. 33 Ethernet 1................................. 31 Ethernet 2................................. 31 Grounding................................. 30 USB.................................. 32 Interrupt assignments..........................132, 133 IP65..................................24 Key Editor................................149 Key switch................................177 LED..................................34 LEDs..................................34 Panel PC 2100 swing arm user's manual V1.00...
  • Page 190 Radio Frequency Interference Statements......................162 RAM address assignments..........................132 recovery DVD..............................136 Relative humidity..............................24 Removing the interface cover..........................86 Replacing a system unit............................88 Reset button................................. 33 RS232 interface.............................. 73, 77 Run LED................................34 Panel PC 2100 swing arm user's manual V1.00...
  • Page 191 ID..............................143 Vibration................................. 24, 24 Viewing angles..............................171 voltage supply..............................25, 30 Weight................................... 20 WES7.................................. 139 Windows 7................................137 Windows Embedded 8.1 Industry Pro....................... 134 Windows Embedded Standard 7........................139 Wiring..................................91 Panel PC 2100 swing arm user's manual V1.00...

This manual is also suitable for:

Automation panel 92dAutomation panel 93dAutomation panel 99d5ppc2100.by01-0015ppc2100.by11-0015ppc2100.by22-001 ... Show all

Table of Contents

Save PDF