B&R Industries Power Panel 300 User Manual page 410

Software • Power Panel 300 with BIOS
BIOS setting Meaning
Overcurrent This function enables an automatic
reporting message
This function enables an automatic error
message to be sent to the system when
the USB hub is overloaded (e.g. in
Windows XP embedded).
Port 4 assignment With this option, USB port 4 can be
configured.
Motherboard device configuration - thermal configuration
F1/ALT+H:Show Help
Temperatures
CPU Intern:
Board I/O:
Fan:
CMOS Battery:
Close Sub Menu
Figure 279: Motherboard device configuration - thermal configuration
BIOS setting Meaning
CPU internal Displays the current internal processor
temperature.
Board I/O Indicates the current board I/O
temperature.
Fan Displays fan speed for the selected panel
(depending on features).
CMOS battery The status of the built-in CMOS battery is
displayed here.
Possible displays:
OK - Battery is ok, Bad - Battery
must be replaced.
410
Enabled
Disabled
Host
Device
Not used
Table 145: BIOS USB configuration menu (Forts.)
XpressROM Setup
ESC:Exit ALT+Q:Go to Main Menu
Thermal Configuration
56°C
42°C
0RPM
OK
Table 146: BIOS thermal configuration menu
Setting options Effect
Enables this function.
Disables this function.
Functions as host.
Functions as device (two computers can be
connected via port 4 - Master -> Slave).
In BIOS, the default value (=Host) is assigned.
ENTER:Select
Setting options Effect
None -
None -
None -
None -
Power Panel 300/400 User's Manual V 2.10
+/-:Choice