Installation - B&R Industries Power Panel 300 User Manual

6.3 Installation

Upon request, Windows Embedded Standard 2009 can be preinstalled at B&R Austria on a
suitable CompactFlash card (min. 1GB). The PP300/400 system is then automatically
configured after it has been switched on for the first time. This procedure takes approximately 30
minutes, and the device will be rebooted a number of times.
6.4 Drivers
All drivers required for operation are preinstalled on the operating system. If an older driver
version is installed, the latest version can be downloaded from the B&R homepage
automation.com) and installed. A potentially activated "Enhanced Write Filter (EWF)" must be
taken into consideration.
6.4.1 Touch screen driver
The touch screen driver must be manually installed in order to operate Automation Panel 800 or
Automation Panel 900 touch screen devices. The driver can be downloaded from the download
area on the B&R homepage (www.br-automation.com). A potentially activated "Enhanced
Write Filter (EWF)" must be taken into consideration.
Information:
Required drivers can only be downloaded from the B&R homepage, not from
manufacturers' pages.
Power Panel 300/400 User's Manual V 2.10
Software • Power Panel with Windows Embedded Standard 2009
(www.br-
479