Bios Settings For Qvga Power Panel Devices - B&R Industries Power Panel 300 User Manual

Software • Power Panel 300 with BIOS

1.4 BIOS settings for QVGA Power Panel devices

Information:
The BIOS default values can be found in the section 1.5 "BIOS default values" on
page 445.
1.4.1 Main menu
Immediately after the DEL button is pressed during startup, the main BIOS setup menu appears.
The individual menu items are explained in detail in the following sections.
Shortcut BIOS setup menu
T Time 00:02:56
D Date 03/12/2007
B Motherboard device
configuration
M Memory and cache
optimization
C System clock/PLL
configuration
P Power management
I Device information
H Miscellaneous configuration
O Boot order
424
XpressROM Setup
Main Menu
>>T. Time 12:30:25
D. Date 04/19/2007
B. Motherboard Device Configuration
M. Memory and Cache Optimization
C. System Clock/PLL Configuration
P. Power Management
I. Device Information
H. Micellaneous Configuration
O. Boot Order
L. Load Defaults
S. Save Values Without Exit
Q. Exit Without Save
X. Save Values and Exit
Set the current time in the RTC
Figure 290: Main menu
Function
The system time can be configured here.
The system date can be configured here.
Motherboard resources can be configured here.
The settings for memory management can be made here.
The timing settings can be made here.
Setup of various APM (Advanced Power Management) options.
Important parameters (e.g. temperature, mode/node position, etc.) for a Power Panel device
are displayed here.
The various BIOS settings can be configured here (Summary screen, Halt on errors, etc.)
The boot order can be set here.
Table 153: Overview of BIOS main menu functions
Power Panel 300/400 User's Manual V 2.10