B&R Automation Device Interface (Adi) Driver - Control Center - B&R Industries Power Panel 300 User Manual

Software • B&R Automation Device Interface (ADI) driver - Control Center
8. B&R Automation Device Interface (ADI) driver - Control Center
The ADI (Automation Device Interface) driver enables access to specific functions of B&R
devices. Settings for this device can be read and edited using the B&R Control Center applet in
the control panel.
Figure 327: ADI Control Center screenshots (Version 1.50) - example
Features (device dependent)
• Adjusting the display brightness of connected Panels
• Reading device specific keys (in order for this to be possible, a key configuration must be
installed that was created with the B&R Key Editor)
• Activation of device specific LEDs on a foil keypad
• Reading temperatures, fan speeds, and statistical data
• Reading user settings and factory settings
• Reading software versions
• Updating and securing firmware
• Creating reports about the current system (support assistance)
• Setting the SDL equalizer value for the SDL cable adjustment
Power Panel 300/400 User's Manual V 2.10 481