Time - B&R Industries Power Panel 300 User Manual

Shortcut BIOS setup menu
L Load defaults
S Save values without exit
Q Exit without save
X Save values and exit
Table 153: Overview of BIOS main menu functions (Forts.)

1.4.2 Time

The currently configured system time is displayed here. The time is buffered by a battery (CMOS
battery) after the Power Panel device has been switched off.
By selecting the item "Time" and the confirming by pressing Enter, or using the shortcut "A", you
can enter a new system time. The format HH:MM[:SS] must be entered as follows:
Example: Set time to 13:00:00.
The entry can be made in three different ways using the keyboard:
• 13:00:00 - Confirm with Enter
• 01:00:00 PM - Confirm with Enter
• 13: - Confirm with Enter
Information:
If using a German keyboard, press the "Shift+ö" key to enter ":".
Power Panel 300/400 User's Manual V 2.10
Function
Load the optimal BIOS settings for best performance.
Saves BIOS values without exiting BIOS setup.
Exits BIOS setup without saving any changes.
Saves settings and exits BIOS setup.
XpressROM Setup
Main Menu
>>T. Time 12:30:25
D. Date 04/19/2007
B. Motherboard Device Configuration
M. Memory and Cache Optimization
C. System Clock/PLL Configuration
P. Power Management
I. Device Information
H. Micellaneous Configuration
O. Boot Order
L. Load Defaults
S. Save Values Without Exit
Q. Exit Without Save
X. Save Values and Exit
Main Menu/T. Time
Time:
TIME as HH:MM[:SS] (Sec. Optional)
Figure 291: Time
Software • Power Panel 300 with BIOS
425