Time - B&R Industries Power Panel 300 User Manual

Software • Power Panel 300 with BIOS
Shortcut BIOS setup menu
I Device information
H Miscellaneous configuration
O Boot order
L Load defaults
S Save values without exit
Q Exit without save
X Save values and exit

1.3.2 Time

F1/ALT+H:Show Help
T. Time 12:30:25
D. Date 04/19/2007
B. Motherboard Device Configuration
M. Memory an Cache Optimization
C. System Clock/PLL Configuration
P. Power Management
I. Device Information
H. Miscellaneous Configuration
O. Boot Order
L. Load Defaults
S. Save Values Without Exit
Q. Exit Without Save
X. Save values and Exit
Time: _
TIME as HH:MM[:SS] (Seconds are optional)
Set the current time in the RTC
The currently configured system time is displayed here. The time is buffered by a battery (CMOS
battery) after the Power Panel device has been switched off.
By selecting the item "Time" and the confirming by pressing Enter, or using the shortcut "A", you
can enter a new system time. The format HH:MM[:SS] must be entered as follows:
Example: Set time to 13:00:00.
The entry can be made in three different ways using the keyboard:
402
Function
Important parameters (e.g. temperature, mode/node position, etc.) for a Power Panel device
are displayed here.
The various BIOS settings can be configured here (Summary screen, Halt on errors, etc.)
The boot order can be set here.
Load the optimal BIOS settings for best performance.
Saves BIOS values without exiting BIOS setup.
Exits BIOS setup without saving any changes.
Saves settings and exits BIOS setup.
Table 139: Overview of BIOS main menu functions (Forts.)
XpressROM Setup
ESC:Exit ALT+Q:Go to Main Menu
Main Menu/T. Time
Figure 271: Time
ENTER:Select
Main Menu
Power Panel 300/400 User's Manual V 2.10
+/-:Choice