B&R Industries Power Panel 300 User Manual page 432

Software • Power Panel 300 with BIOS
BIOS setting Meaning
PCI INTC#
Activates IRQ for aPCI slot 2.
First IRQ for aPCI slot 2 and IRQ for
IRQ for aPCI slot 1.
PCI INTD#
Activates IRQ for the USB controller.
Second IRQ for aPCI slot 2.
aPCI slots Information about aPCI modules located
in the aPCI slots of the
Power Panel device are displayed here.
Motherboard device configuration - USB configuration
Figure 298: Motherboard device configuration - USB configuration
BIOS setting Meaning
OHCI Turns USB 1.0/1.1 support on/off (OHCI -
Open Host Controller Interface).
EHCI Turns USB 2.0 support on/off (EHCI -
Enhanced Host Controller Interface).
UDC Turns the USB device controller on/off.
When on, only the PCI config space is
activated in BIOS.
OTG Turns the On-to-Go device on/off. Only
the PCI config space is activated in BIOS.
432
3, 4, 5, 6, 7, 9, 10, 11, 12,
3, 4, 5, 6, 7, 9, 10, 11, 12,
Table 158: BIOS PCI configuration menu (Forts.)
XpressROM Setup
USB Configuration
USB 2.0 Settings
>>OHCI: Enabled
EHCI: Enabled
UDC: Disabled
OTG: Disabled
Overcurrent reporting:
Port 4 assignment:
Enable/Disable OHCI PCI header
Table 159: BIOS USB configuration menu
Setting options Effect
Disabled No IRQ is reserved.
Manual configuration of the IRQ.
14 or 15
Disabled No IRQ is reserved.
Manual configuration of the IRQ.
14 or 15
None -
Disabled
Host
Setting options Effect
Enabled Activates the USB port.
Disabled Deactivates the USB port.
Enabled Enables this function.
Disabled Disables this function.
Enabled Enables this function.
Disabled Disables this function.
Enabled Enables this function.
Disabled Disables this function.
Power Panel 300/400 User's Manual V 2.10