Technical data • Power Panel 400 with Automation Runtime
4.1.11 CompactFlash slot
Power Panel devices are equipped with a CompactFlash slot that is accessible from the side.
Type I CompactFlash cards are supported.
Safety latch
It is possible to secure the CompactFlash slot using the latch provided. By pressing the ejector
(using a pointed object is the best way to do this), the CompactFlash card can be changed
quickly and safely.
Caution!
The power must be turned off before inserting or removing the CompactFlash card!
As a safety measure, a sticker is also attached to Power Panel devices stating this.
4.1.12 aPCI Slot(s)
Either 1 or 2 aPCI slots are available depending on the Power Panel variant. B&R System 2005
aPCI interface modules can be inserted (available aPCI interface modules - see B&R homepage
- Products - Control systems - System 2005 - Communication modules).
172
Ejection lever
Figure 100: CompactFlash slot
Figure 101: aPCI Slot(s)
Power Panel 300/400 User's Manual V 2.10