Technical data • Power Panel 400 with Automation Runtime
4.21.4 Cutout installation
The cutout hole is to be made according to the following dimensions for cutout installation. The
device must be mounted using the retaining clips included in delivery.
187
180.5
6.5
0
4.21.5 Contents of delivery
The following components are included in the delivery of the Power Panel device:
Amount
1
10
1
290
Outer contour (Power Panel)
Cutout dimensions 289 ±0.5 mm x 174 ±0.5 mm
Figure 199: Cutout installation - 4PP452.0571-45
Component
Power Panel PP452 5.7" QVGA, 1 aPCI, keys
Retaining clips included
Lithium battery 3 V / 950 mAh included
Table 106: Contents of delivery - 4PP452.0571-45
Cutout
for
4PP352.0571-35
4PP452.0571-45
4PP452.0571-65
4PP452.0571-75
4PP452.0571-B5
Power Panel 300/400 User's Manual V 2.10