2. Replacement CMOS batteries
The lithium battery is needed for buffering the BIOS CMOS data, the real-time clock, and SRAM
data.
The battery is subject to wear and must be replaced when the battery power ("Bad" status) is
insufficient (see "Changing the battery" on page 528).
2.1 Order data
Model number
Description
0AC201.91
Lithium batteries, 4 pcs., 3 V / 950 mAh button cell
4A0006.00-000
Lithium battery, 1 piece, 3 V / 950 mAh button cell
2.2 Technical data
Information:
The following characteristics, features and limit values only apply to this accessory
and can deviate those specified for the entire device. For the entire device where
this accessory is installed, refer to the data provided specifically for the entire
device.
The technical data is current as of when this manual was printed. We reserve the
right to make changes.
Features
Capacity
Voltage
Self discharge at +23°C
Storage time
Environmental characteristics
Storage temperature
Relative humidity
Power Panel 300/400 User's Manual V 2.10
Accessories • Replacement CMOS batteries
Table 228: Order data - Lithium batteries
0AC201.91
Table 229: Technical data - Lithium batteries
Figure
4A0006.00-000
950 mAh
3 V
< 1% per year
Max. 3 years at +30°C
-20 to +60°C
0 to 95%, non-condensing
507