B&R Industries Power Panel 300 User Manual page 433

BIOS setting Meaning
Overcurrent This function enables an automatic
reporting message
This function enables an automatic error
message to be sent to the system when
the USB hub is overloaded (e.g. in
Windows XP embedded).
Port 4 assignment With this option, USB port 4 can be
configured.
Motherboard device configuration - thermal configuration
Figure 299: Motherboard device configuration - thermal configuration
BIOS setting Meaning
CPU internal Displays the current internal processor
temperature.
Board I/O Indicates the current board I/O
temperature.
Fan Displays fan speed for the selected panel
(depending on features).
CMOS battery The status of the built-in CMOS battery is
displayed here.
Possible displays:
OK - Battery is ok, Bad - Battery
must be replaced.
Close submenu Close submenu
Power Panel 300/400 User's Manual V 2.10
Setting options
Disabled
Not used
Table 159: BIOS USB configuration menu
XpressROM Setup
Thermal Configuration
Temperatures
CPU Intern: 51°C
Board I/O: 39°C
Fan: 0RPM
CMOS Battery: OK
>>Close Sub Menu
Setting options
Table 160: BIOS thermal configuration menu
Software • Power Panel 300 with BIOS
Effect
Enabled Enables this function.
Disables this function.
Host Functions as host.
Device Functions as device (two computers can be
connected via port 4 - Master -> Slave).
In BIOS, the default value (=Host) is assigned.
Effect
None -
None -
None -
None -
Enter Closes the submenu.
433