Usb Port - B&R Industries Power Panel 300 User Manual

Technical data • Power Panel 400 with Automation Runtime

4.1.4 USB port

The Power Panel 300/400 devices have a USB 2.0 (Universal Serial Bus) host controller with
multiple USB ports, two of which are on the outside for easy user access.
1)
Transfer rate Low speed (1.5 MBit/s), full speed
(12 MBit/s), to high speed (480 MBit/s)
Power supply Max. 500 mA per port
Maximum 5 m (not including hub)
cable length
1) The actual value depends on the operating system or diver being used.
2) For safety, every USB port is equipped with a maintenance free "USB current-limiting circuit breaker" (max. 500 mA)
Warning!
Peripheral USB devices can be connected to the USB interfaces. Due to the vast
number of USB devices available on the market, B&R cannot guarantee their
performance. B&R does ensure the performance of all USB devices that they
provide.
Warning!
Because of general PC specifications, this interface should be handled with extreme
care with regard to EMC, location of cables, etc.
166
Universal serial bus
2)
Table 61: USB port
Power Panel 300/400 User's Manual V 2.10
2x USB Type A, female