Software • Power Panel 300 with BIOS
1.3.11 Load defaults
F1/ALT+H:Show Help
T. Time 21:56:12
D. Date 08/21/2006
Defaults set!
B. Motherboard Device Configuration
M. Memory an Cache Optimization
C. System Clock/PLL Configuration
P. Power Management
I. Device Information
H. Miscellaneous Configuration
O. Boot Order
L. Load Defaults
S. Save Values Without Exit
Hit any key to continue_
Q. Exit Without Save
X. Save values and Exit
Set the current time in the RTC
Under this BIOS menu item (shortcut "L"), by pressing any key you can load
the values that were set at the time BIOS setup was opened. All changes made up to that point
are lost as a result.
Restoring the default BIOS values
The BIOS default values can also be restored without entering the BIOS setup. For procedure,
see Section 1.5.8 "Restoring the default BIOS values" on page 447.
420
XpressROM Setup
ESC:Exit
ALT+Q:Go to Main Menu
Main Menu
Info
Figure 286: Load defaults
ENTER:Select
Power Panel 300/400 User's Manual V 2.10
+/-:Choice