Motherboard device configuration - I/O configuration
Figure 295: Motherboard device configuration - I/O configuration
BIOS setting
Meaning
COM A
Configures the UART address range and
the corresponding interrupt for the
optional internal interface.
Information:
Two ports cannot use the same
address range and interrupt.
COM C
Configures the UART address range and
the corresponding interrupt for the
external serial interface.
Information:
Two ports cannot use the same
address range and interrupt.
Power Panel 300/400 User's Manual V 2.10
XpressROM Setup
I/O Configuration
Serial Port Configuration
>>COM A: Disabled
COM C: 0x3f8 IRQ
4
COM D: 0x2f8 IRQ
3
Configure the 1st on-board UART.
Setting options
0x3f8 IRQ 4
0x2f8 IRQ 3
0x3e8 IRQ 4
0x2e8 IRQ 3
0x3f8 IRQ 4
0x2f8 IRQ 3
0x3e8 IRQ 4
0x2e8 IRQ 3
0x3f8 IRQ 12
0x2f8 IRQ 11
0x3e8 IRQ 12
0x2e8 IRO 11
Table 156: BIOS super I/O configuration menu
Software • Power Panel 300 with BIOS
Effect
Disabled
No assignment.
Use this address range and interrupt.
Disabled
No assignment. The serial interface is disabled.
Use this address range and interrupt.
429