Plot 2 - Relative To Marker - NorthStar MX500 Operator's & Installation Manual

Operator's Manual

PLOT 2 - Relative to Marker

The PLOT2 functions are the same as the PLOT1. Refer to the pre-
vious section for customizing the display. One added feature to the
PLOT2 screen is the ability to place the marker at any coordinate
that you want and have the CDU automatically calculate a bearing
and distance to the marker.
If you want to relocate the marker, press EDIT to enter the edit mode,
then highlight the Move Marker softkey and press ENT. You can
move the marker by: defining a coordinate (see the flashing cursor
over the coordinates in the upper left window), moving the magnify-
ing glass using the cursor keys and highlighting the To
then pressing ENT, or by highlighting the To Boat softkey then press-
ing ENT, which moves the cursor to the boat's present position. If
you choose to use the magnifying glass method, make sure you move
this icon before you select the Move Marker softkey. After you high-
light the Move Marker softkey and press ENT, pressing on the cur-
sor keys only allows you to move within the coordinate fields.
82
Man Over Board
softkey
Version 3.0