Serial I/O; Time - Mode And Format Control - NorthStar MX500 Operator's & Installation Manual

Configuration

Serial I/O

This menu provides a means to verify the status and baud rate settings
of all the NMEA ports. Note that the NMEA ports 3 & 4 are reserved
for the MX antenna GPS and Beacon receiver interface. You have no
control in these two ports. You can not change the baud settings in its
original values.

Time - Mode and Format Control

This menu item sets the method in which time is displayed on the
receiver.
Time System: Sets the time to UTC (default) or Local. When Local is
Version 3.0
MX500 Serial I/O Menu
selected, several parameters associated with local time are displayed.
Operator's Manual
145