Downloading Waypoints & Routes To Other Devices - NorthStar MX500 Operator's & Installation Manual

Waypoint
6. Enter the waypoint number where you want the first waypoint
Downloading Waypoints & Routes to Other Devices
Refer to the Appendix F of this manual for hardware interfacing guide-
lines.
The CDU can download all of your stored waypoints and routes, and
your active route to other NMEA 0183 devices which accept the RTE,
Rnn, and WPL data sentences. These sentences are controlled in the
Version 3.0
moved to in Destination WPT Number.
If the destination waypoint number is already being used, you
will be prompted to either overwrite the first waypoint (Yes) and
each subsequent waypoint that is to be overwritten, confirming
each waypoint one at a time, overwrite all the waypoints (Yes To
All), not overwrite any waypoints (No); or Escape back to base
softkey menu.
Operator's Manual
63